Recent content by drbacke


MASSIVE restock of EV Batteries at www.batteryhookup.com 5% coupon "POWERWALLS"
  1. D

    45kWh 18650 DIY Powerwall + 9kW Solarpower in Germany

    Hello, thank you, we are glad that the work helps others with their projects. Of course, we do not know what the fireproof box can withstand in an emergency. But in the case of a strong chain reaction, we suspect that the box quickly reaches its limits. But exactly, it gives you valuable minutes...
  2. D

    45kWh 18650 DIY Powerwall + 9kW Solarpower in Germany

    Hi, I was allowed to film a friend's solar system. For plant is quite exciting, so I have added extra English subtitles for you. He uses 5600 18650 cells with the diy BMS from my channel and a mpi 5k (mppsolar).
  3. D

    MPPSolar MPI10 Questions

    Hey guys, does one of you know if the MPI 10k from MPPSolar can feed only the current load into the house grid (withthe EnergyMeter)? So just feed your actual load andwithout feeding into the public grid? (I hope you understand what I mean)
  4. D

    LiFePo4 Cells Voltage Drop after Charging, normal?

    Hello, everybody, I got new China-LiFePo4 cells and after charging the voltage drops relatively fast by 0.1V. Is the behaviour normal for LiFePo4? It seems quite strange to me. All other values are ok, IR=6mOhm and the capactiyis ok.
  5. D

    Experiment: Soldering 18650 = Capacity Fade?

    I'll admit that's a possibility. To be honest, it's just too expensive for me. I also think that if you can't see a change in capacity and resistance, then the probability of a change after a few months is relatively low. But maybe there is one. Another possibility would be to take 4 new and...
  6. D

    Experiment: Soldering 18650 = Capacity Fade?

    That would actually be very interesting, unfortunately these specialcellsare my servants for everything ;) I'm afraid but these cells won't live for a few months. In addition, there would be no comparison cells, how is that possible with used ones? So I would have no statement after a few...
  7. D

    Experiment: Soldering 18650 = Capacity Fade?

    Your article just didn't have the proof ;)
  8. D

    Experiment: Soldering 18650 = Capacity Fade?

    Hey, guys, I did a test to find out if soldering 18650 cells leads to a loss of capacity or not. I tested 4 cells and used the following procedure: 1. Each cell measured 4x (capacity). So 16 tests overall 2. 2x soldered, (one solder point)and then again soldereda piece of virtual wire. 3. let it...
  9. D

    Hybrid vs. OffGrid

    Thanks for the answers, that was very helpful. I think I understood the off grid solution now. Just one question to off-grid: The most off-grid inverter (i'm intersted in mppsolar devices, or maybe there are better) have a bypass mode, so just connect the grid to the output if th battery goes...
  10. D

    Hybrid vs. OffGrid

    Hey guys, we are about to build a house and of course I am already thinking about the PV system with a DIY Battery Bank. At the moment I have a 2x7s60p 9kWh 24V battery and would like to use it with a MPPSolar Inverter. A few things I do not understand however yet. In the Offgrid case: 1 How...
  11. D

    LTO as buffer

    Adding new cells and a hybrid system is simply not the same. From the amount of work and also from the behavior. 10kWh are enough for me and I just don't want to see notebook batteries any more ^^ So why not use and protect my 10kWh with a relatively small high-quality buffer. With a small...
  12. D

    LTO as buffer

    I asked myself, if it would be possible to add a lto battery Bank before (parallel but physacl. before the 18650 Bank) my 18650 Bank. The idea is to increase the lifespan of my 18650 bank with few lto batteries. Just like using capacitors to get rid of the voltage spikes. So i currently use a...
  13. D

    DIY firesafe casing - Test

    I used different kind of cells. Some (nearly) full charged Sanyo heaters, some fully chargedDLG cells and some "good" and full charged Sanyo cells.
  14. D

    Development of a free Capacity Predicition, need your help

    Hey Wolf, sorry I'm currently working on a cheap Raspi based battery monitoring system. So I forgot to post the new data, here it is. I think the results are good enuough to be helpfull: However, the most interesting resultwere these guys here (Cell Name, Nominal mAh, pre Voltage, pre...
Top