GoneDiving
New member
- Joined
- Jan 17, 2020
- Messages
- 26
I have just connected my second PIP5048MK in parallel using the OEM parallel board and cables to find that whenever the Utilities mains is connected my house RCD trips.
I originally had one 5048MK connected direct to the mains to charge and test the batteries and had no problems. It's only after installing the parallel inverter that I now have issues.
Are there any special earthing requirements or settings to parralel units?
To my knowledge, all wiring is as per the manual.
Utility mains is being connected to the inverter at a 15a powerpoint.
House RCD trips immediately upon connection
Both inverters continue to work when RCD trips.
The only error message is #04, low battery voltage. 51.0v
230vac output works fine.
Am I missing something?
I originally had one 5048MK connected direct to the mains to charge and test the batteries and had no problems. It's only after installing the parallel inverter that I now have issues.
Are there any special earthing requirements or settings to parralel units?
To my knowledge, all wiring is as per the manual.
Utility mains is being connected to the inverter at a 15a powerpoint.
House RCD trips immediately upon connection
Both inverters continue to work when RCD trips.
The only error message is #04, low battery voltage. 51.0v
230vac output works fine.
Am I missing something?