Search results

Greetings, Been a while since I've posted... I have 10 x Mitsubishi LEV50 cell packs available. Each pack contains 8 x LEV50 cells, with the packs having a nominal voltage of 32 volts DC. Originally purchased these cells as a pack removed from a running low mileage 2015 Mitsubishi Miev vehicle...

Greetings, Been a while since posting. I want to use 2 x LEV50 cells to power an outdoor project, and want to use a BMS to manage the cell charging via a solar panel. Each LEV50 cell is about 3.75 volts, so the combined serial voltage will be around 8 volts. A BMS like Batrium is overkill for 2...

Has been way too long since my last post... loads of reasons which I wont go into in detail. Have been backfrom our 6 months inEurope for a few months now, and have been getting things back up to speed. Unfortunately a medical situation (gallbladder removal)prior to leaving Germany has been...

I have imported several Mitsubishi Outlander PHEV and Mitsubishi MiEV battery packs, both LEV50N and LEV40 Lithium Ion batteries. I also have access to Tesla battery packs, but am yet to find a client looking to purchase. Personally I would recommend you look seriously when thinking about...

Hiya DO, great to hear from you, and thanks for checking in. I have been in Europe for 3 months, so the project has been placed on hold. Have met Carel in the Netherlands which was awesome, have a trial BMS board, so when we are back will resume the project. Have also taken the opportunity to...

Welcome :)

Hi Sean, had been looking at REC, and I had been recommended to the REC byCarel. So yes, certainly happy to take a look. Interested to get your thoughts on REC i.e. pros and cons etc.

Hi Redpacket, I have been tardy in replying. Thanks for the reply, however I had hoped there might an android app available. My wife only does android tablet, and I think I'd get one of those 'are you serious' looks if I suggested she use a Raspberry Pi... :P But I will look at the...

Hi Carel, Great to hear from you, and appreciate the update on SIMPbms. Based on the battery design above, do you think SIMPbms would be a viable option, and can the Mitsubishi BMS cards be used in the 14S setup, or should I consider another cell layout i.e. should I leave the cell layoutas...

Hi Redpacket, Geek, and Sean. Thank you for the feedback, really appreciate you making the time. The LEV50 cells come from the save EV as suggested by Sean, and each of the packs of 4 cells will be together as they were from the original manufacturer. I am not locked into the BMS design, as it...

My question relates to battery config design and BMS design, so I figured posting inmy build thread would save multiple posts... guess I was wrong Anyway, rather than rewriting the whole post... would appreciate advice or guidance from those of you familar with battery setups andBatrium BMS on...

My question relates to battery config design and BMS design, so I figured posting inmy build thread would save multiple posts... guess I was wrong :P Anyway, rather than rewriting the whole post... would appreciate advice or guidance from those of you familar with Batrium BMS on the question...

Finally managed to brain dump my initial thinking on my LEV50 cell configuration and how that might interconnect with a Batrium BMS using BlockMonM8 units. This just early thinking, so open to other ideas and feedback. The diagram below is a 14S configuration, with groups of 4 LEV50 cells. Each...

Welcome! I am really south from Yorkshire... but glad you joined the forum :)

I was inspired by Adam Savage's 'first order tool retrieve-ability' to create a basic work benchtool storage unit. Developed the basic design and put it together from some scrap wood, which looked pretty dull but was practical and would do the job. I asked myfour year old daughterwhat she...

Finally found time to create my prototype LEV50Nbattery storage shelves. Looked at a a number of ideas and decided to go with a self-made aluminium setup. More time consuming, but I just couldn't find anything off the shelf that was easier and could beat the cost of the raw aluminium...

I have a thing for LED lighting, so when planning and building the Home DC I added some wiring in the walls forWS2811 programmable LED strips. Finally got the work done last night and it looks awesomely star trek like... Yes, it serves no purpose, but hey what the hell :P Rack will be...

Hi Folks, This question has probably been asked before, but here goes. I have an existing SolarMax grid tied inverter, and I've always used the MaxMonitoring App on my phone and tablet to monitor the statistics of the inverter. It appears the folks at SolarMaxare retiring the MaxMonitoring app...