Search results


MASSIVE restock of EV Batteries at www.batteryhookup.com 5% coupon "POWERWALLS"
  1. S

    Software Conversion Maintenance

    Good work Mike on the conversion, it must have been a lot of work. It seems not all images under FAQ Fuse Wires were migrated. I have looked for similar images but haven't found them. Thanks
  2. S

    Pazuri Powerwall

    So today had my first real test of my powerwall. For >11hrs, we didn't have mains power, so I hooked up the system to the house to provide power. Suffice to say, the system seem to work well. The cells had an average draw of ~10A DC and ~1.5A AC. The battery seems fine but I think I have a...
  3. S

    rePackr - Divergence/Deviation

    yes 900mAh. Thanks for the correction
  4. S

    Pazuri Powerwall

    Hi dragonfly, I have updated the code to fix: Crashing of the script after some time. Its now quite robust and handles failures well Refactored the code and introduce concise classes. When you confirm its working from your end I will delete the old classes. I have clearly marked classes to be...
  5. S

    rePackr - Divergence/Deviation

    My packs 7S75P have a divergence of 900Ah between the largest and the smallest. I used Opus for testing each individual cell and the repackr to arrange the cells.
  6. S

    Pazuri Powerwall

    Update: Finally got some time to continue this project. I soldered the cells to form the packs and fully charged them. The packs' capacity range from 125Ah - 115Ah (125.45Ah, 123.57Ah, 117.14Ah, 119.01Ah, 119.17Ah, 116.39Ah). I think I can add some cells to the low capacity packs to reduce the...
  7. S

    Help connecting a chinese BMS, EPever charge controller, Battery and Inverter

    Thanks all for the help and suggestions. Looking at the diagram again and I guess I was high when I asked for help. The diagram is self explanatory
  8. S

    Pazuri Powerwall

    Hi Eddy, It's awesome to connect with you on this forum. I concur with you, solar in Kenya issa goldmine. I am just about to finish my first project of 3.7kW and I can't wait to get off-grid. Where did you get your Li-ion from? I will take a look at Watchpower, seems cool. Cheers
  9. S

    Pazuri Powerwall

    Yes it has worked. I received the PR
  10. S

    Pazuri Powerwall

    1. Log in to your github account 2. Navigate to my github project --> https://github.com/badili/diy_powerwall_monitoring 3. On the top right of my project, click the fork button 4. Select your account 5. Github will fork my project to your account 6. If successful, under the name of your...
  11. S

    Pazuri Powerwall

    Good progress. I am checking on how I can help you create a PR Ok, you cant create a PR since you didn't clone my repo from my github to your github... I can pull your changes offline, commit them to my github and then: 1. You clone from my github to your github 2. Clone from your github to...
  12. S

    Pazuri Powerwall

    You cannot push directly to the github repo. Github is configured to have maintainers of a project who control quality as well as ensure conflicts are resolved in a streamlined manner. For easy collaboration, you should: Create an account on github and clone my master branch...
  13. S

    Pazuri Powerwall

    This is great that you are trying to push changes to the repo. Awesome. For github to submit the changes, you are meant to create a pull request. It is easy and very straightforward. I will then merge the changes. Thanks
  14. S

    Pazuri Powerwall

    This is awesome. You can mask out the passwords and push to github or include all the passwords in a secrets file and omit it from the commit. Thanks
  15. S

    Help connecting a chinese BMS, EPever charge controller, Battery and Inverter

    I am having trouble connecting my cheap chinese BMS [1], Epever charge controller, Battery and inverter I was able to connect the BMS correctly and it is working fine. I can charge the battery from the solar panels using the charge controller. My main problem is how to connect the Inverter to...
  16. S

    Pazuri Powerwall

    Hahaha, I will. No worries, all credits and links have been given. Seehttps://github.com/badili/diy_powerwall_monitoring Some of the improvements so far: Added instructions on using the code I am running it on a virtual environment. Much cleaner than installing modules system wide. python has...
  17. S

    Pazuri Powerwall

    Thanks ajw22. I have started modifying it and testing it. Would you mind if I clean it up, add a readme on how to use it and post it online publicly?
  18. S

    AJW22's modular 3d printed 60kWh PowerShelf

    Thanks, will test it and revert
  19. S

    Pazuri Powerwall

    Thanks for this. It couldn't have come at a more timely time. Can you share the updatedsource code if you have done updates on it? I will share back any improvements that I make.
  20. S

    AJW22's modular 3d printed 60kWh PowerShelf

    Awesome progress BobinTN and AJW22 and thanks for the initial source code as shared with AJW22 Can you share the updated source code? I am in the stage of adding the BMS and start playing monitoring and graphing. Thanks
Top