Hello guys,
I started my adventure a few months ago with a 3 phase system (Victron multiplus 48/5000) + cerbo gx+ smartshunt + simpbms and 4 modules of Tesla battery (5.3kwh). I've encountered a small problem, SimpBMS doesn't update SOC value overtime, if the battery changes it's SOC, the...
Hi! I try to explain my problem:
I have a home instalation with Solar Panels + Victron RS Solar Smart Solar 230V + 2 x LG ID3 lithium Battery+ SimpBMS (BLCKBMS model) with individual CMU from i3 + VenusGX. The instalation is this:
All is configured:
- RSSolar is setup to charge battery to...
Hello,
had plesure to setup such a ESS ~ two years ago
25kWh ESS, 12 Tesla modules, 48V
MPPT SmartSolar & 1.8kW solar panels
Victron MPII 5kVA single phase, SIMP BMS
BMS is connected --> Ve.Can on MP
MPPT is connected --> Ve.Direct on MP
last month I have found 'MPPT error #67 BMS lost' on my...
Hi Everyone,
I'm currently building a off grid solar system that uses 16x Tesla Model S battery modules as storage but facing some issues with configuring the simpBMS so was wondering if anyone could help. The setup is =~ 48 V and uses 3x Victron Quattro connected to provide 3 Phase AC, I keep...
Hi all,
For my off-grid setup (Tesla modules / SIMP / SmartShunt / Cerbo GX / Multiplus / 2x MPPT), I enabled DVCC mode on the Cerbo as an extra safety to prevent the battery from charging at too much amps.
However I notice that it now limits the charge current to ±20A instead of the 100Amps...
I have a solar system using Tesla SimpBMS and the SOC numbers always seems to be off. I.E. After charging from shore power or solar, if I power cycle the BMS the SOC numbers always change.
The default configuration show a 100AH battery which is obviously not correct. How do you calculate based...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.