Inverted 18650
Member
- Joined
- Jul 4, 2017
- Messages
- 221
AIMS PICOGLF60W24V240VS
Purchased at auction as "new in the box- damaged during shipping." It had broken cooling fan from being stood up on its sideby the shipping agency, during delivery to the store.Extremely easy fix and had no other issues.
Thischarging circuitryis not intended for use with lithium-ion because you cannot disable the float charge. You can howeverdisable the entire charger and use a properli-ioncharger, which is what I have done. I used this, in system, for a month to ensure it works without issue. There were noproblems with it.
Built in 85A charger works well, but as I said above, you cannot leave it unattended if your charging li-ion. Once the 2nd stage finishes, and it goes into float mode, you have to turn it ( the charger only, not the entire inverter) off.I played with the idea of just adding a float bypass board, but decided to sell it instead. Uses 240VAC for charging. It has a built-in mains transfer switch as well, so if your only using it for a backup, it will automaticallyturn itself on if the power goes out. Auto-gen start feature as well.
Split phase 120-/240, 6000W (12000W surge).
Must be willing to kick upwithin a couple hours drive of Nashville. TN. I willworkwith you if you live within a few hundred miles and get it too you, but I wont mail it. Shipping would cost over $150 with insurance and they will probably drop it anyway.Id rather put it in the truck and hand deliver it. I will bring batteries and we can test it on site as well.
Asking $900.00 but will accept ANY FAIR offer within the next 7 days. I need the cash to remodel my lab for thenew charging station. I am taking one wall down and building another one to make an '18650 Lab.'
If no one here replies within a week, ( AUG 1st)I will stick in on eBay.
Purchased at auction as "new in the box- damaged during shipping." It had broken cooling fan from being stood up on its sideby the shipping agency, during delivery to the store.Extremely easy fix and had no other issues.
Thischarging circuitryis not intended for use with lithium-ion because you cannot disable the float charge. You can howeverdisable the entire charger and use a properli-ioncharger, which is what I have done. I used this, in system, for a month to ensure it works without issue. There were noproblems with it.
Built in 85A charger works well, but as I said above, you cannot leave it unattended if your charging li-ion. Once the 2nd stage finishes, and it goes into float mode, you have to turn it ( the charger only, not the entire inverter) off.I played with the idea of just adding a float bypass board, but decided to sell it instead. Uses 240VAC for charging. It has a built-in mains transfer switch as well, so if your only using it for a backup, it will automaticallyturn itself on if the power goes out. Auto-gen start feature as well.
Split phase 120-/240, 6000W (12000W surge).
Must be willing to kick upwithin a couple hours drive of Nashville. TN. I willworkwith you if you live within a few hundred miles and get it too you, but I wont mail it. Shipping would cost over $150 with insurance and they will probably drop it anyway.Id rather put it in the truck and hand deliver it. I will bring batteries and we can test it on site as well.
Asking $900.00 but will accept ANY FAIR offer within the next 7 days. I need the cash to remodel my lab for thenew charging station. I am taking one wall down and building another one to make an '18650 Lab.'
If no one here replies within a week, ( AUG 1st)I will stick in on eBay.
