Community Cell Count!

Status
Not open for further replies.

Scepterr

Member
Joined
Feb 19, 2017
Messages
234
Hey Mike, Pete what do you think about active powerwall, stats like voltage, soc, ambient temp being charted on the site. The reporting would be done by something simple/cheap like a nodemcu or teensy w/esp8266, like $25 range. Basically if everybody with active walls has this we'll know actual energy capacity available at any given time
 

hbpowerwall

Administrator
Staff member
Joined
Oct 7, 2016
Messages
1,912
Scepterr said:
Hey Mike, Pete what do you think about active powerwall, stats like voltage, soc, ambient temp being charted on the site. The reporting would be done by something simple/cheap like a nodemcu or teensy w/esp8266, like $25 range. Basically if everybody with active walls has this we'll know actual energy capacity available at any given time

Something likehttps://freeboard.io/board/xKtg_F ?or https://www.pvoutput.org/ ?
 

daromer

Moderator
Staff member
Joined
Oct 8, 2016
Messages
5,573
The count and such you edit on top link.

For dynamic page like sugested you need it hooked up and it updates several times a day
 

LithiumSolar

Administrator
Staff member
Joined
Oct 8, 2016
Messages
2,393
The cell count page has been updated to add a green star next to verified powerwall configurations. Over the next few days, we (by "we", I mean Peter :p) will be going through and checking off configurations which we can confirm through pictures or otherwise.

If you would like your submission "verified", please start a thread in the DIY Powerwall Builds section if you haven't already and post some pictures/information about your build. If you would prefer to keep the information private, but would still like a verified flag, you can PM the information to Peter directly.
 

hbpowerwall

Administrator
Staff member
Joined
Oct 7, 2016
Messages
1,912
We are all over it :)
 

Steven Edelman

New member
Joined
May 31, 2017
Messages
4
mike said:
The cell count page has been updated to add a green star next to verified powerwall configurations. Over the next few days, we (by "we", I mean Peter :p) will be going through and checking off configurations which we can confirm through pictures or otherwise.

If you would like your submission "verified", please start a thread in the DIY Powerwall Builds section if you haven't already and post some pictures/information about your build. If you would prefer to keep the information private, but would still like a verified flag, you can PM the information to Peter directly.

Why just in the DIY Powerall Builds thread? I don't have a powerwall build but I did open a thread on the ebike section for the batteries that I have salvaged with photos for my paltry number of cells. :s
 

Korishan

Moderator
Staff member
Joined
Jan 7, 2017
Messages
6,401
I agree with Steven, Mike. the eBike section should be included ;) Maybe in the cell count, you could put an option for "Powerwall; eBike; Other" or something to that effect.
 

Darmok

Member
Joined
Feb 18, 2017
Messages
98
Add in an "application" selection ie; power wall, camping power, ebike....
 
Status
Not open for further replies.
Top