Daly 14S 48V 60A BMS

[hel2000]

Hi All, I'd like to upgrade my BMS to a Bluetooth capable one. I found this one:

https://www.aliexpress.com/item/100...68#3468#15615#605&&pdp_ext_f={"scene":"3339"}

Daly Smart BMS 4S LiFePo4 12V 24V 36V 48V 30A 60A 80A 100A 120A 150A 200A 250A 300A 400A Li-Ion LTO 3S 7S 8S 10​

The question is can I use the existing wiring so I don't have take it all apart?

Thanks,
Henry.

 

[daromer]

If yours is the same as above then yes. But we dont know what you got....

 

[hel2000]

This is what I've got:

Daly 14S 48V 10A BMS.​

 

[floydR]

The connector may be the same even if it is not after numbering balance wires cut off old connector , splice the new bms connector to the the balance wires.
Later floyd

 

[hel2000]

Good idea, thanks!

 

[hel2000]

I've just got the a new BMS (the one from AliExpress has not come yet!!!) from Walmart. The connectors are a little different, they mate but there is no good contact. I hook up the tip of the bear wire to the existing female connector and then plug in the new BMS. I'm not sure if it makes good contact but the voltage on solar controller keeps jumping up and down. When I turn on the inverter it keeps beeping at me because it doesn't have enough voltage. Is it necessary to have the balance wires all connected up in order to get a stable voltage?
Any feedback will be appreciated.

Henry.