Electric Kid four wheeler battery

So the packs have came in . Have them took apart . How are you guys taking them apart without sparking up the world. I would hate to know i had 1000 plus to process.The board being in the middle is very agrivating . Mine wasnt on the side. Orderd a solderless kit . I have to say great concept but i wont be getting any more . I probably pressed them in a bit to much a lot of them broke. The ones with the heat shrink seemed to be to big.

Do have to say the packs seem to be nice . They look a bit different though mine came with the cells completely heat shrink wrapped . Bought 5 more .and plan to use some of them for a ebike . 36volt . Plug and play. Seems a lot easier with less time consuming too for that .
 
flush cut snippers and go snip snip. leave the tabs on the cells and just solder to the tabs.
 
Will remember that next time i get more cells . I used regular wire cutters like i do for coax at peoples houses . Good idea though. I pulled mine completely off. Still had traces of that mess.
 
great thread!
I will keep watching this one because this week I will make a battery for my nephew too and I will create a thread to show it :)
 
arierep60 said:
great thread!
I will keep watching this one because this week I will make a battery for my nephew too and I will create a thread to show it :)
Click to expand...


:cool:
Is that supposed to be a hint you want some pictures of my horrid able work heres a couple of them for now :dodgy:


image_kfonzz.jpg

image_oupprf.jpg
 
Those mounts look nice!
I will use the cheap black ones from ebay and I think they will work fine :D
btw you have idea off the autonomy you will get with the new LiIon battery?
 
I will be 3d printing my next ones. These i got to easy change out . But Looks like to change 1 cell . I would have to still take apart the entire thing nearly. I do like the fact they are red and blue though . No idea of how much longer i will get with that one . Hopefully near double . Being the stock battery is 12v 12 ah. And 1 pack is 36v 4.4 i have almost pack and half i believe .
 
nokiasixteth said:
I will be 3d printing my next ones. These i got to easy change out . But Looks like to change 1 cell . I would have to still take apart the entire thing nearly. I do like the fact they are red and blue though . No idea of how much longer i will get with that one . Hopefully near double . Being the stock battery is 12v 12 ah. And 1 pack is 36v 4.4 i have almost pack and half i believe .
Click to expand...

I'm waiting for news :)
btw I will create my thread today ;)
 
You must log in or register to reply here.
Back
Top