My Wall of Power

No new updates on the power system, but have made some more progress on my power shed.


image_feebad.jpg
 
CrankyCoder said:
AZ_Tekkie said:
And we're live. Made one design flaw though, the batteries stick out further than i anticipated and interfer with the door on the cabinet closing and locking. I'll have to do some slight fabrication to the door to get it back in working order.

What box is that? I like it!

You just need to find a electrical supplier that sells used and wholesale electrical stuff.
 
AZ_Tekkie said:
My latest creation. 3d printed a case to house my volt meters.

image_aovrim.jpg

Love your work man. I was wondering if you could show us how your wired your 7S battery monitor box to the RJ45 connector and how you wired theethernet cables? Thanks alot
 
WebmasterHJ said:
AZ_Tekkie said:
My latest creation. 3d printed a case to house my volt meters.

Love your work man. I was wondering if you could show us how your wired your 7S battery monitor box to the RJ45 connector and how you wired theethernet cables? Thanks alot

Thanks. I no longer use this to monitor cell voltage, switched over to using the batrium bms. I can't recall how exactly i wired it, but just went pin to pin. 7 cells so you have pin 1 negative most and then the next 7 pins go to each cell bank.
 
AZ_Tekkie said:
My latest creation. 3d printed a case to house my volt meters.

image_aovrim.jpg


Thingiverse link:http://www.thingiverse.com/thing:2187073

Came across your thread,love the build, andvolt meter setup. Have been searching for a meter like the one at the very top. Any chance you could share where you sourced it from?
 
If you go to the thingiverse link, it lists what all was used to make that meter.
 
Only 3 years in the making, my Power Shed is finally up and running. Currently only have the first pack of about 12kwh installed, working on the second 12kwh pack. Inverters are MPP 3048LV running in split phase. 10 solar panels on the shed roof, about 2.8kw.
 

Attachments

  • 20181209_170540.jpg
    20181209_170540.jpg
    1.1 MB · Views: 214
  • 20181209_170557.jpg
    20181209_170557.jpg
    956.1 KB · Views: 191
  • 20190120_170644.jpg
    20190120_170644.jpg
    2 MB · Views: 184
  • 20190209_180501.jpg
    20190209_180501.jpg
    2.3 MB · Views: 178
  • 20190209_180520.jpg
    20190209_180520.jpg
    2.6 MB · Views: 184
  • 20190223_113538.jpg
    20190223_113538.jpg
    2.6 MB · Views: 178
  • 20190316_184628.jpg
    20190316_184628.jpg
    2.3 MB · Views: 218
  • 20200516_222052.jpg
    20200516_222052.jpg
    2.8 MB · Views: 220
  • 20201024_181929.jpg
    20201024_181929.jpg
    1.7 MB · Views: 212
  • 20210103_153650.jpg
    20210103_153650.jpg
    2.7 MB · Views: 218
  • 20210109_220202.jpg
    20210109_220202.jpg
    3.3 MB · Views: 231
  • 20210501_175440.jpg
    20210501_175440.jpg
    2.8 MB · Views: 236
  • 20210508_163148.jpg
    20210508_163148.jpg
    2.8 MB · Views: 207
  • 20210508_164521.jpg
    20210508_164521.jpg
    3.7 MB · Views: 219
Very nice setup.
 
Updated photos (02/04/2018)

Current Wall 2.0


View attachment 5879
stranger chatting app

View attachment 16148



Newest Pack using LG G5 Cell Phone batteries. Should be around 5.5Kwh. Will be installing soon, have the case they're going in ready, just need to mount the pack inside.


View attachment 15114



Start of my new power shed. 11ftx17.5ft. Will be for my power wall and either storage and/or an office if i decide to finish the inside.


View attachment 4675
online chat portals
View attachment 19391



Charging Setup

View attachment 21685
That looks fantastic reminds me once we start cracking we should have a Setup of the month like some other forums do
 
Back
Top