Okay, so it seems that after the mod, any cells that I test in this charger test 5% higher capacity compared to other chargers of the same make & model, I am not sure if this means the capacity test is more accurate now than it was, or less.So I did the mod to one of my LittoKala chargers, but found that it didn't make any discernible difference, but while I had the unit taken apart, I did find room for another mod regarding the heat sinking on the MOSFETs responsible for the discharge mode, but I'll save that for it's own thread on another day.
Edit: Turns out, the modded one is not testing high, rather, the newer, unmodded ones are testing low, approximately 6.5% - 7% low, and modding them hasn't changed this.
Last edited: