Hello,
I'm using ANT BMS on my home solar project and monitoring cells/capacity via Raspberry Pi, but it's capable of only 50A charging (can go up to 60A/70A with a little push), but now I'm building a bigger solar project and I need to be able to charge/discharge with a continous rate of 100A (even 125A+ would be better), and also be able to configure monitoring via RPi (to InfluxDB/Grafana, etc.)
There are several cheap versions of BMS's with that power capability, but for none of them I found a complete solution for monitoring:
1. JBD 16S 48V BMS - https://www.aliexpress.com/item/1005001831386283.html
2. Jikong BMS 1A/2A Active Balance - https://www.aliexpress.com/item/4001192978656.html
3. DALY Smart 16S 48V - https://www.aliexpress.com/item/1005001310255704.html
Can anyone suggest a working solution for my needs?
I'm using ANT BMS on my home solar project and monitoring cells/capacity via Raspberry Pi, but it's capable of only 50A charging (can go up to 60A/70A with a little push), but now I'm building a bigger solar project and I need to be able to charge/discharge with a continous rate of 100A (even 125A+ would be better), and also be able to configure monitoring via RPi (to InfluxDB/Grafana, etc.)
There are several cheap versions of BMS's with that power capability, but for none of them I found a complete solution for monitoring:
1. JBD 16S 48V BMS - https://www.aliexpress.com/item/1005001831386283.html
2. Jikong BMS 1A/2A Active Balance - https://www.aliexpress.com/item/4001192978656.html
3. DALY Smart 16S 48V - https://www.aliexpress.com/item/1005001310255704.html
Can anyone suggest a working solution for my needs?