Hi All,
I had plans to build a mobile power source for camping and assorted use. I have recently acquired a van and have decided to go LifePo4 due to unattended charging inside this small space. Included is everything needed to create a 7s system up to 2kwh.
I am asking $250 + shipping for everything.
Thanks for your consideration.
-Jess
....edit to add the nickel strips
I had plans to build a mobile power source for camping and assorted use. I have recently acquired a van and have decided to go LifePo4 due to unattended charging inside this small space. Included is everything needed to create a 7s system up to 2kwh.
- 80 cells from battery hookup modem packs, never cycled
- 29 modem packs 4 cells per pack - from battery hookup ( $100 worth of never cycled cells )
- 17ft of 4p nickel strips (paid $40)
- 228 recycled laptop cells. These are all a minimum of 2000mah cells many above this
- Daly 7s 100a BMS with charge port (paid $48)
- Daly 7s 80a Smart BMS with temperature monitor and Bluetooth common port (paid $84)
- Stacks of 4x5 cell holders
- Case of assorted heat shrink
- Chinese spot welder with additional cap already soldered to protect the FETs from the original design flaw (paid $30)
I am asking $250 + shipping for everything.
Thanks for your consideration.
-Jess
....edit to add the nickel strips
Attachments
-
PXL_20210420_173353112.jpg418.6 KB · Views: 119
-
PXL_20210420_173343507.jpg403.6 KB · Views: 114
-
PXL_20210420_173635862.jpg453.3 KB · Views: 114
-
PXL_20210420_173349649.jpg397.4 KB · Views: 111
-
PXL_20210420_173640116.jpg408.1 KB · Views: 112
-
PXL_20210420_173345961.jpg348.7 KB · Views: 109
-
PXL_20210420_173400371.jpg373.8 KB · Views: 107
-
PXL_20210420_180015068.jpg1.9 MB · Views: 113
Last edited: