Inverted 18650
Member
- Joined
- Jul 4, 2017
- Messages
- 221
Hey All,
I am looking to sell my test station because I am building a new one and I am not going to use it much anymore. Its badass and will charge and discharge test up to 20A per channel, 300Ws max per channel. Supports up to 6S and will monitor voltage for each cell as it charges a 2-6S pack. Works with PB, LiPo, LiLo, NiCd, NiMh,etc. Also has foam cutting & DC motor driver modes and a couple more cool features. DC powered and in "regenerative mode" you can power it with a battery bank and then when you discharge test cells, thepower is not wasted, it is pumped back into thewhatever battery is powering the station.
Its truly the top of the line charger but I do not need theextra features.I donot fly RC copters or use the cars/trucks which is really what it was made for. I still have the original box and manual and a bunch of extras. Since I only use it for 18650's, I have made a few trays that hold 12-20 cells in parallel for 20A charging and there are also four 6S trays that are wired up with JXT connector so the charger can read the voltage at each cell. I will include a few sets of cables, trays, connectors, etc as well as all the original equipment.
Selling it (here only) with all the extras for $300. Just the charger cost me $280and Ive had itjust over a year.I am going to get 10 Opus kits for the interim ( so I can test 40 cells at a time, this one only does 24), while I am buildingmy new system because I still needa way to test my cells until its done.I would trade for 10 of the Opus B3000, 4 cell testers...
Its really made for the RC guys/gals...but does more than its job with 18650's. Iusually build amy packs ( 3 that are 8 x 30 or whatever) and then charge each bank with it up to 4.2V each @ 20A's with this unit.
Check the pics, these are just a few. Browse the manual and you'll see what it can do. If none of thePowerwallcrew wants it, then in a week or so, I'll stick in on eBay.
Note, I have powered direct via solar panels and used it as a charge controller too! although it does require you to attend it and its not totally "set and forget."
Check the pics and datasheet. Serious inquires only please. I don't really need the money, but I wont give it away because its so insanely cool; but you will get a ton of extra shit for the $300..and i'm sure you'll be stoked, escpecailly if you are also into the RC stuff.
Note: I also need a bunch of cell holders, the 3x1 or the 4x5...i would also work a deal for a bulk lot of cell holders. Just shoot me a message. If no one replies, watch for it on eBay.