Victron connect via bluetooth

b0re

Member
Joined
Aug 31, 2018
Messages
48
Hello,

I have a

  1. smart shunt
  2. smart solar mppt 100/30
  3. Victron control gx
  4. cerbo gx
Can I link these via Bluetooth and not use cables?

Thanks
 

Danjul

New member
Joined
Dec 14, 2020
Messages
5
Hello B0re,

You can join the Smart Shunt and your SmartSolar to the same VE.Smart wireless network and transmit voltage, current and temperature from the Shunt to the MPPT.

You can read more about this in section 6.3 in the manual or on this site VE.Smart Networking
 

b0re

Member
Joined
Aug 31, 2018
Messages
48
Ok I can connect the shunt and the mppt but can see any were in the setting to connect them to the cerbo gx
 
Last edited:

Danjul

New member
Joined
Dec 14, 2020
Messages
5
If
Ok I can connect the shunt and the mppt but can see any were in the setting to connect them to the cerbo gx
If you want to connect them to a GX device you use VE.Direct cables directly between
 
Top