Power Wheel upgrade

well it works, down and dirty to see if it would work.
pack is at about 15 volts and has way more power.

4s5p

i will be rebuilding and installing cell lvl fuse wire.
going to try the 34 awg i have, might need bigger.
single strand for the bus wire
the factory pack has a 30 amp fuse.

do they make heat shrink large enough to shrink the whole pack?


image_uwzrkp.jpg


image_xcxgvj.jpg




image_ustdws.jpg

image_dqlunb.jpg
 
1958greyhound said:
well it works, down and dirty to see if it would work.
pack is at about 15 volts and has way more power.

4s5p

i will be rebuilding and installing cell lvl fuse wire.
going to try the 34 awg i have, might need bigger.
single strand for the bus wire
the factory pack has a 30 amp fuse.

do they make heat shrink large enough to shrink the whole pack?


image_uwzrkp.jpg


image_xcxgvj.jpg




image_ustdws.jpg

image_dqlunb.jpg




All sizes of shrink wrap on Aliexpress, probably ebay as well
 
You've achieved a lot of power, that's cool! Is all this still working well? There have been no glitches?
 
Back
Top