Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Repurpose Makita 18v battery packs
You must check if the BMS does communicate with the tool/charger over data line. The packs I got send the charge state to the tool/charger and the tool/charger control charge or discharge. The packs themselves can't disconnect load. So if not used in a tool or charger of the manufacturer you could over- or overdischarge them wich would bring you much trouble. Damaged cells when overdischarge or maybe fire in case of charging. You need to be careful. You could check if there are any Tools for the packs wich only have two pins. Lights or fans for example. If yes the packs should be able to disconnect by them. Always be safe...
My Powerwall Build Thread

Maniac_Powerwall: 1x 14S100P 18650 LiIo, 6x 345W LG panels, MPP Solar PIP5048GK, Batrium Watchmon4 BMS

Messages In This Thread
Repurpose Makita 18v battery packs - by Lootsef - 02-13-2020, 01:01 PM
RE: Repurpose Makita 18v battery packs - by Maniac_Powerwall - 02-15-2020, 09:04 AM

Forum Jump:

Users browsing this thread: 1 Guest(s)