Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Behaviour of cells in parallel take 2
#1
Another experiment has taken place at the Wolf's PowIRwall location.
Previous posts on this subject are at https://secondlifestorage.com/showthread.php?tid=7846
I dragged out my 4p testing rig and decided to test 4 ICR18650-28A cells that had a reasonable IR at ≈ 50mΩ but their mAh testing was in the low 2000mAh with the SKYRC tester.

cell1 4.176V 52.74mΩ 2089mAh
cell2 4.178V 51.20mΩ 2141mAh
cell3 4.178V 53.73mΩ 2072mAh
cell4 4.180V 53.30mΩ 2043mAh

As predicted the discharge of all cells was relatively even as the IR and mAh were closely matched so no cell was stressed more than the other. Temperature did rise about 4°C toward the end. Temperature on cell 1 and cell 4 was less as they did not have a cell on both sides such as cell 2 and cell 3.
 
Since these cells have a spec sheet of max 4.30V full charge and cutoff at 2.75V. I will run this test again with those parameters and see what happens under those circumstances.
Pictures of my testing lab.
  

Wolf
For Info Google Drive

Great ABB shunt breaker seller River City Industrial
Great prices and superb service.
 [Image: em2566%20(1)__19172.1521541365.jpg?c=2]

Not your average Wolf       
            Cool
Reply


Messages In This Thread
Behaviour of cells in parallel take 2 - by Wolf - 03-19-2020, 01:35 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)