Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tesla Battery Module from PW1
#1
Hi all, 
Got my self a old 2016 Tesla Powerwall 1, for a decent price (if it is not stuffed)
Got several sites on Solar/AGM with Victron kit, so new the lithium game.

Connected up a few things and couldn't see voltage. got the system hooked up to the mains and still couldn't see the pack getting charged.
Decided to finally crack this baby open and get to the modules. Found one of them at 2.8v and the other at 1.5v, from what I can see the nominal is 22v...

What would the recommended steps and products to at least see if these are still viable. What type of charger / charge volt/rate should i aim for?
I don't want to dismantle the pack (yet) down to the cell level, hoping to try and recover the entire pack.

If successful then I'll get the BMS setup and boards ect

ASY,HVBAT,MODULE,TT, 22V01,POD,SSTR
TPN: 1063198-00-a

Cheers in advance
Ben

Reply


Messages In This Thread
Tesla Battery Module from PW1 - by 80211 - 05-19-2020, 05:42 AM
RE: Tesla Battery Module from PW1 - by thom - 05-20-2020, 03:56 PM
RE: Tesla Battery Module from PW1 - by 80211 - 05-21-2020, 02:34 AM
RE: Tesla Battery Module from PW1 - by thom - 05-21-2020, 06:42 AM
RE: Tesla Battery Module from PW1 - by 80211 - 05-23-2020, 10:20 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)