Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flux Capacitor is "on the line"!
Victron Multiplus II 5000VA (upgredeable to 3xVictron Multiplus. The new Victrons would go to the sides of the existing one, inside the cabinet)
PV Array1: 12 x 280W Jinko
PV Array2: 12 x 270W Jinko
MPPTs: Victron Smartsolar 250/60 + Victron Smartsolar 250/70
Battery: 32x280Ah LiFePo4 into a 16S2P 48V 28kWh. 20mm x 5mm busbars and 70mm2 cabling. (upgradeable to 64x280Ah, by adding two lower shelves)
BMS: Batrium WM4 + 16 BlockMons 8
Upgrade to 1,21GW flux capacitor! Wink 

Thank you all for sharing your knowledge. That's what made this build possible! 

Super proud of my build!  Big Grin

ajw22 and Redpacket like this post
Victron MultiPlus-II 48/5000/70-50 || 6,6kW PV on Victron Smartsolar 250/60 and 250/70 MPPT || Victron Venus GX || Custom battery: 28kWh 48V 560Ah (32x280Ah 16S2P) || Batrium WM4 w/ 16 blockmons

Messages In This Thread
Flux Capacitor is "on the line"! - by Rui P - 05-29-2020, 11:20 AM

Forum Jump:

Users browsing this thread: 1 Guest(s)