Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ATmega328P based Spotwlder for 18650
#1
Hi All,

Just completed a project to control Weld time when welding 18650 cells. Wish to know if anyone has a design for electrode holder.


The built of the pcb and details ishere

The PCB was designed to switch on the MOT via a TRIAC at the peak of the Sine-wave and not at the zero cross as the load here, a MOT is highly inductive.

Features include:

1. Surge Protection
2. Inbuilt Power Supply
3. Dual Pulse Welding
4. Dual Surge protection
5. Thermal fuse at the secondary
6. Zero Cross Peak detection
7. Variable timed pulse (indicated by LED from 100ms to 450ms)
8. Dual function
Manual Weld and Continuous Weld (upon holding weld button for more than 800ms)
9. TVS protection diode at the dc side
10. Snubber Circuit
11. TRIAC to control AC load
12. Audible Weld alert

Working:
At the press of the weld button, two weld is done. The first weld is the pre-weld that prepares the strip to be welded to the cell by burning off any impurities and the second weld happens after a delay of 500ms. This weld joins the strip with the cell. Holding down the weld button initiates a 6 weld sequence with 2 seconds delay between welds.
Big Time hobbyist.
Test Gear: BM869s | Hakko FX888D | Rigol 1054Z | Atten 858D+
Chargers: iCharger 4010 Duo | Nitecore D4 | Opus BT - C3100
RC: Traxxas E-Revo

Reply
#2
SOoo your first post was to sell your stuff... not cool...

Edit post to add more detail and remove links for now... or i'll delete (even tho it seems to be a good idea)


Edit : I fixed it
Second Life Storage Cell Finder
Get up to 10% off with coupon code 'Powerwalls'
Lithium Power Australia http://bit.ly/lithium_power
Battery Hookup USA http://bit.ly/batteryhookup 
BigBattery USA  https://bit.ly/Bigbattery
Power 2 Spare USA  https://ebay.to/2SuJWsr
Pro-LOX Netherlands  https://ebay.to/2HsyPKr
Paolo Italy https://ebay.to/38xPUhT
Reply
#3
Could this become the place to mention the other very similar such welders that are available ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)