Cell Counter Chemistries Poll

Would you like to see additional chemistry support in the cell counter? If so, please specify which chemistries specifically you would be looking for. Thanks!

Boston power cells

I vote for perhaps same or close to same as country. Add them based on people asking for it.

For instance:
"I want this type of size with this type of chem and it has this nominal voltage"

Example:
18650 - LiFePo4 - 3.2V
Boston cells - LiIon - 3.65V (http://www.boston-power.com/sites/default/files/datasheets/940-0013-001 Swing 5300 DS Rev 02.pdf)

(Perhaps not as above but nicer... )

[emoji12]

This could be the list - think it covers all what realistically may be available in quantity for powerwalls.

NiMh (Nickel Metal Hydride) 1.2V
NiCd (Nickel Cadmium) 1.2V
Lead-Acid (Wet) - 12V
Lead-Acid (AGM) - 12V
Lead-Acid (Gel) - 12V
LFP (Lithium Iron Phosphate) 3.3V
LiFe (Lithium Iron) 3.6V (default 18650)
LTO (Lithium Titanate Oxide) 2.4V
LCO (lithium Cobalt Oxide) 3.6V
LMO (Lithium Manganese Oxide) 3.7V
NMC (Lithium Nickel Manganese Cobalt Oxide) 3.6V
NCA (Lithium Nickel Cobalt Aluminium Oxide) 3.6V

I think that if you go beyond basic chemistry groups then you will end up with a very very long list of variations / manufacturers quoting slightly different cell voltages (like Boston) that may be just aditive based variations or plate sizes for custom applications (long float low cyclic high discharge).

The other variable that may be of interest is cell size / type which is mainly for Lithium variants :
18650
21700
26650
32650
66160
Prismatic
Pouch
Lead-Acid cased

---

Each category also needs an "Other type" or "Other size" option... just in case...