CrankyCoder
Member
- Joined
- Mar 11, 2017
- Messages
- 95
So I have a question for everyone. My install is small. Right now it's 4s80p. Mainly to get me around that 12v mark and I can use some 12v inverters I have. I am not too interested in AC power at this time, most of my requirements for this are all for DC.
The problem I have is placement. I am hesitant about putting it all on my back porch as I live in FL and the humidity is unkind. I would like to put it in my garage, but one of my main uses for this is for a water pump that is 12v/10a. The distance I am concerned about. I need to go about 70ft from garage to where I want the pump. With 10amps at 70ft just about everything shows I need to go with some 6awg wire or even 4awg.
So I was wondering if anyone has any suggestions?
Thanks!
The problem I have is placement. I am hesitant about putting it all on my back porch as I live in FL and the humidity is unkind. I would like to put it in my garage, but one of my main uses for this is for a water pump that is 12v/10a. The distance I am concerned about. I need to go about 70ft from garage to where I want the pump. With 10amps at 70ft just about everything shows I need to go with some 6awg wire or even 4awg.
So I was wondering if anyone has any suggestions?
Thanks!