Does anyone know of a way to program the imax b6 to cut off at 0.8 amp? I wanted to program this so I don't have to keep checking on the batteries and it will auto turn off at certain amp pull.
Perhaps it is possible to program with the computer? You would think this would be something they would want you to have control over.
The reasoning is because I am charging 16P strips and these cells are rated fully charged at 50mAh per cell. I want to stop them at that, which would be (0.8Amp / 16 = 50mA)
By default the iMAX b6 will stop at 50mAh which would translate to (50mAh / 16 = 3mA) which is overcharged.
Perhaps it is possible to program with the computer? You would think this would be something they would want you to have control over.
The reasoning is because I am charging 16P strips and these cells are rated fully charged at 50mAh per cell. I want to stop them at that, which would be (0.8Amp / 16 = 50mA)
By default the iMAX b6 will stop at 50mAh which would translate to (50mAh / 16 = 3mA) which is overcharged.