Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help with MT50 and EPever 4210A
#1
Just purchased an EPever Tracer 4210a and MT50 remote meter. I have a 3s80p battery bank to charge. I bought the MT50 because that was supposed to give me adjustable parameters in "user" setting for 9-17V that would work for lithium batteries. I wanted to limit the charge voltage to 12.3V and associated parameters. Problem is I get a "para error" when trying to set these parameters. I can only adjust a little bit – eg float V to 13.3 but no lower.

Is there a way of doing it or did I buy the wrong thing....... again.
Reply
#2
Never mind guys, got it sorted. My problem was trying to adjust voltages out of sequence.
Reply
#3
Glad you figured it out Big Grin I couldn't help as I don't know anything about those.
Proceed with caution. Knowledge is Power! Literally! Cool 
Knowledge is Power; Absolute Knowledge is Absolutely Shocking!
Certified 18650 Cell Reclamation Technician

Please come join in general chit-chat and randomness at Discord Chat (channels: general, 3d-printing, linux&coding, 18650, humor, ...)
(this chat is not directly affiliated with SecondLifeStorage; VALID email req'd)
Reply
#4
That's okay Korishan. Seems like a nice unit, but a bit of a pain to set up. What do most people use?
Reply
#5
I actually have the same situation, but I don't think I try to set values out of range. What am I doing wrong?
Kind regards
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)