Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
To BMS or NOT to BMS?
#11
Domingo Google battery management system and Google Will show many of em Wink
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply
#12
(05-17-2019, 05:16 PM)daromer Wrote: Domingo Google battery management system and Google Will show many of em Wink

Been there, done that. NEEEEEXT!!! Big Grin Big Grin Big Grin . I just want to get something that's been proven and someone has experienced the ups and downs. For example, I can vouch for this Chinese 7s BMS: : https://www.amazon.com/dp/B07518PP5K/ref...3CbC92TTCK

But this 10s one sucks BIG TIME: https://www.amazon.com/dp/B07DRP5DYB/ref...3Cb16WKSSR
Always draining the batteries even though no balancing needed. Had it installed last night and today I see in anger how a cloudless day is passing by, I'm at work and the batteries not taking a single F*&%@ mW of power (from the remote monitoring.) BMS keeps on disconnecting the eSmart3 whenever it attempts to charge. modules were at nominal voltage when I left this morning (3.6 - 3.8v) Battery is now at 33.2v because of the draining.
1500W of Residual Thermonuclear Energy Collectors (6X250W 2S)
40A eSmart3 MPPT Controller
Raspberry Pi 3 remote monitoring
BATTERIES, Need Lots of Batteries!
800 18650 (80P10S= 40.0v) 4.1Kw
12Kw Pure Sinewave 36V Inverter
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)