Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Megacellcharger
#1
Anyone know when the next batch will be sent out?

Anyone know if they are on this forum?
Reply
#2
I Guess you checked their website?
WuggyBuggy likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#3
(06-22-2019, 03:30 PM)daromer Wrote: I Guess you checked their website?

Yeah, cant find anything on there.
Reply
#4
Blind? Smile It is on the Landing page Wink
WuggyBuggy likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#5
Wooooooooooow..... blind indeed! I read that as 2018 Big Grin So I thought they havnt updated since.

Thanks! Big Grin Big Grin
Reply
#6
Interesting,
I miss time and ir
What is ems?
just 16? i will order two.
Hmmm i dig into this one
WuggyBuggy likes this post
Reply
#7
(06-26-2019, 05:57 PM)100kwh-hunter Wrote: Interesting,
I miss time and ir
What is ems?
just 16? i will order two.
Hmmm i dig into this one

I can't answer you that. But it seems quite good. What I've seen around.. facebook and youtube.
Reply
#8
And costly?
WuggyBuggy likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#9
Speaking frankly:
I was thinking about a similar system, only with technology of the 1980's...
With a old 286 pc and a dot matrix printer (modified so it can process cells), both programing in gw basic.
The cells would have been placed in a beld like a m60 or such, a belt that can hold 240 (or more)at one time(for 8 for one month, its a 8 bit port).
the printer would give each cell a number and print the ir and remaining capacity on the cell.
Recorded in old dbase.
Basically old robotics as you will.

Thru a 232 port modified to a 234 port it would do ir, charging and discharging(x2 or 3)
8 at the time, times 3 at a day....on full auto?!?
The only thing you have to do is, take them out and replace every day, 8 16 or 24 cells and put them into their right bucket.
But i have no time.
Mechanical is also easy for me.

But i really like this concept, like i stated before: i will dig into this one.
If the system could be improved like i have, with units, so you can put them aside and let them rest, so you wont't have to fiddle around anymore with those cells, that would be a plus 10 for me.

i hope you understand what i am trying to tell?
WuggyBuggy likes this post
Reply
#10
Hi,
I'm looking for my first charger to process 18650 cell, and I come across the megacellcharger. The most interesting part about this project is I think the PC software which allow to automatic fill a database from the charge/discharge data.
But I can't find information other than from the official website/FB page.. It have been around for sereval month now and probably several hundred unit shipped.
Does anyone here have one and willing to give feedback ? ^^
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)