Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Air Separation between Series
#1
Hi guys,

i am making a 7s20p portable battery.  What are your thoughts on having air separtion in a mobile pack?

7 separate packs of 2x10 connected in series with about an inch in between them side to side with connectors vs 1pack 14x10
Reply
#2
I wouldnt for a normal to low powered pack. A normal battery should not get hot unless stressed.
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply


Who read this thread?
29 User(s) read this thread:
hbpowerwall (08-27-2019, 05:49 AM), Ibiza (08-26-2019, 08:33 PM), Bubba (08-26-2019, 11:34 PM), Riplash (08-27-2019, 09:10 PM), chuckp (08-26-2019, 09:25 PM), clupton (09-01-2019, 03:54 PM), Wolf (08-26-2019, 08:22 PM), ajw22 (08-27-2019, 01:14 PM), RikH (08-27-2019, 05:41 AM), kevinjaye (08-26-2019, 08:44 PM), 100kwh-hunter (09-02-2019, 07:12 PM), Doin it (08-30-2019, 03:49 AM), dragonfly (08-27-2019, 06:05 AM), Redpacket (08-27-2019, 08:24 AM), jonyjoe505 (08-27-2019, 03:27 AM), gpn (08-27-2019, 05:56 PM), daromer (08-27-2019, 05:10 AM), Sean (08-27-2019, 07:24 AM), mike (08-27-2019, 12:51 PM), Majorphill (08-28-2019, 07:08 AM), Korishan (08-27-2019, 09:39 PM), PAF (09-01-2019, 11:46 AM), jdeadman (08-27-2019, 02:16 AM), wim (08-27-2019, 07:35 AM), Geek (08-28-2019, 12:08 AM), Oz18650 (08-27-2019, 08:22 AM), djuro (08-27-2019, 09:18 AM), drchips (08-26-2019, 08:22 PM), diib (08-27-2019, 11:29 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)