Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PIP5048MS external solution to switch to line mode?
#1
Hi,

is there a way to externaly initiate switching from Battey to Line mode on a PIP5048MS inverter? Either with some kind of Programm on a raspi or some other equipment?
As I'm only using temprary Battery solution, and my Batrium is not connected up to now, I would like to have some kind of solution to switch from Battery supply to Line mode, when the Solar Power is not enough for the load any more and the Battery start to get drained.


regards

cadric
1. Installed Grid-Tie System 2017 16,5kWp:  55 x 300Wp BenQ, SMA Tripower 15000-TL30 (18-east/17-south/20-south)
2. Building Offgrid System 7,5 kWp: 25 x 300Wp Solarworld (5x( 3S + 2S )), 2x PIP-5048, Batrium WM4, in process : 18650th Powerwall,  Rest TBD
Reply
#2
The PIP have built in settings that switches between battery and grid.
Just set the low voltage switch in the unit

But yes you can control it as well. Solar-sis that i have made can for instance be configured and do such work if you set it up
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply
#3
Hi daromer,



I will have a look at your system.

thanks



cadric
1. Installed Grid-Tie System 2017 16,5kWp:  55 x 300Wp BenQ, SMA Tripower 15000-TL30 (18-east/17-south/20-south)
2. Building Offgrid System 7,5 kWp: 25 x 300Wp Solarworld (5x( 3S + 2S )), 2x PIP-5048, Batrium WM4, in process : 18650th Powerwall,  Rest TBD
Reply
#4
Hi daromer,

is there some kind of description for installing the solution or parts of it on to an existing system?
I have a RasPi running with some other stuff already and would like to use that instead of using an image.

regards

cadric
1. Installed Grid-Tie System 2017 16,5kWp:  55 x 300Wp BenQ, SMA Tripower 15000-TL30 (18-east/17-south/20-south)
2. Building Offgrid System 7,5 kWp: 25 x 300Wp Solarworld (5x( 3S + 2S )), 2x PIP-5048, Batrium WM4, in process : 18650th Powerwall,  Rest TBD
Reply
#5
All is in the documentation. But its not easy to run since you need to know a fair amount of coding. Its not "push a button software" directly Smile
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply


Who read this thread?
21 User(s) read this thread:
daromer (09-06-2019, 06:39 PM), chuckp (09-06-2019, 09:43 PM), Wolf (09-06-2019, 12:44 PM), Solardad (09-06-2019, 09:37 PM), stevelectric (09-09-2019, 09:07 AM), mufaddalk (09-06-2019, 02:40 PM), OffGridInTheCity (09-04-2019, 09:19 PM), intra (09-05-2019, 01:43 PM), 100kwh-hunter (09-05-2019, 08:34 AM), Riplash (09-04-2019, 05:08 PM), cadric (09-14-2019, 02:01 PM), completelycharged (09-06-2019, 08:28 PM), Sean (09-06-2019, 09:13 AM), mike (09-05-2019, 11:34 AM), PAF (09-06-2019, 10:12 AM), Franky Beuselinck (09-05-2019, 09:07 AM), jdeadman (09-06-2019, 11:16 PM), wim (09-07-2019, 06:35 AM), Geek (09-06-2019, 03:25 AM), HughF (09-05-2019, 10:52 AM), Janusz (09-04-2019, 10:33 PM)

Forum Jump:


Users browsing this thread: 1 Guest(s)