Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
almost complete - RePACKR to apply
#1
Big Grin 
Finally i finish the test part for the moment.
 
14S 100P

 

The repackr session to be apply to re-arrange the CELLs.   Smile Smile


Nest operation : busbar (with terminal block) + weld.

And soon inverter.
Reply
#2
https://www.victronenergy.com/blog/2019/...unlimited/

Bubba likes this post
Reply
#3
(09-20-2019, 05:53 AM)newone972 Wrote: Finally i finish the test part for the moment.
14S 100P

Very nice well done.

I noticed that you have a lot of Sony US18650GR ** cells in pack 2 and 3 . At least that is what they look like.
Please be cautious with those cells as they have a tendency to be high in IR and can cause pack imbalance.

Wolf
newone972 likes this post
If 18 X 650 = 2200+mAh then we have power! 
May all your Cells have an IR of 75mΩ or less Smile
Last count as of 8/7/2019
Total Number of Cells Recorded and processed                 6149
Total Cells required for PowIRwall                                   2856
Total Cells ≥2200mAh, ≥80%, ≥35mΩ, ≤75mΩ, ≥4.12V   2760
For Info Google Drive
Not your average Wolf       
            Cool
Reply
#4
(09-20-2019, 08:57 AM)Sean Wrote: https://www.victronenergy.com/blog/2019/...unlimited/

This is a fantastic resource, thanks for linking it!
newone972 likes this post
Reply
#5
Wink 
(09-20-2019, 10:42 AM)Wolf Wrote:
(09-20-2019, 05:53 AM)newone972 Wrote: Finally i finish the test part for the moment.
14S 100P

Very nice well done.

I noticed that you have a lot of Sony US18650GR ** cells in pack 2 and 3 . At least that is what they look like.
Please be cautious with those cells as they have a tendency to be high in IR and can cause pack imbalance.

Wolf

Hi. thank you for this warning. 

for the moment cells are not correctly dispatched. 
finally i have decided to make a 14S120P battery. 
Because of you intervention i've read discussions around this type of cell. 
when i'll mount the battery i'll be carefull. 

Tongue  May the Power go to the wall  Tongue

Best regards.

(09-23-2019, 10:20 AM)Eduardo Kang Wrote:
(09-20-2019, 08:57 AM)Sean Wrote: https://www.victronenergy.com/blog/2019/...unlimited/

This is a fantastic resource, thanks for linking it!

Hi this is a fantastic ressource.
Reply
#6
Hi. 

Going 14S100P to 14S120P.
jdeadman likes this post
Reply
#7
Congratulations!
I'm right behind you... also going with 14s120p.
Reply
#8
I have used repackr to build my entire 15Kwh Powerwall and 5kWh Camp Wall and to date none of the packs have needed to balance
hbpowerwall and cowpen like this post
******Hi My name is Jason and I have SOCD (Solar Obsessive Compulsive Disorder)*******
Current Powerwall - 1400 Cells 7s200p (modular 40p packs) ~ 12kWh of storage     4x 315W Canadian Solar Panels

Working on the next 7s40p packs     ~2.5kWh

Waiting on 2000 Cells of unused Sony vt4 (2000mah 30A) ~ 15kWh      hehehehehe  More Power
Reply
#9
I really wish i could have done it with my early packs really suffering now
newone972 likes this post
Save 10% at Battery Hookup with code 'Powerwalls' Just enter it in checkout www.batteryhookup.com
Reply
#10
(11-18-2019, 09:27 PM)hbpowerwall Wrote: I really wish i could have done it with my early packs really suffering now
And I want to thank you as your Videos on Pack 5 pushed me to do it exact cell tested number.   Takes a bit of time to find them all but it's not too bad.    

When I capacity test each pack I am within 1Ah of each other.   and that's 4.2 - 3V   I run my Wall 3.5 - 4.1
newone972 likes this post
******Hi My name is Jason and I have SOCD (Solar Obsessive Compulsive Disorder)*******
Current Powerwall - 1400 Cells 7s200p (modular 40p packs) ~ 12kWh of storage     4x 315W Canadian Solar Panels

Working on the next 7s40p packs     ~2.5kWh

Waiting on 2000 Cells of unused Sony vt4 (2000mah 30A) ~ 15kWh      hehehehehe  More Power
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)