Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RC3563 IR tester
#11
(01-05-2020, 03:28 PM)Bubba Wrote: So still needs time to refine, but it works.  So would you prefer this over the YR1035+ now that it is working for you?
Bubba

6 of one half a dozen of the other
I still like the YR1035+ it is smaller and the probe wires are not covered in a thick shrink tubing like the RC3563


The battery testing fixture on the other hand is quick to use  very well constructed and way better than what comes with the YR1035+
The RC3563 fixture has no sides so it is easy to insert a cell read the results and on to the next one.

The YR1035+ fixture


So in conclusion I think I will start to use the RC3563 when I check single cells with the fixture as it is very quick to insert the cell get a reading and move on and the YR1035+ when I am just spot testing a cell.

Both tester (YR1035+ and the RC3563) readings (actually all my YR1030/YR1035+ based testers) are so close to each other in readings it is not worth mentioning.

Hope this helps.

Wolf

(01-05-2020, 09:34 PM)Oz18650 Wrote: I thought you had been quiet and was wondering what was happening for you.
I am sorry to hear what has been happening with Houdini..
Good luck to you and Houdini.
Hopefully he escapes well from this .

Thanks OZ18650

Yea I hope he escapes as well.

Wolf
For Info Google Drive

Great ABB shunt breaker seller River City Industrial
Great prices and superb service.
 [Image: em2566%20(1)__19172.1521541365.jpg?c=2]

Not your average Wolf       
            Cool
Reply
#12
Hi, can anyone please provide me the Windows Software for the RC3563. I dont get it from my supplier (aliexpress).
Thanks a lot!
Reply
#13
RC3563 

Software English
https://drive.google.com/file/d/13Gh_yRXC-1o6uQlgiHZclGybJ1Ig8-0Q/view?usp=sharing

Driver
https://drive.google.com/file/d/1PsMJdYIsXiMDbRGfAAj76LZ9wOUMfPT5/view?usp=sharing

If you are running windows 10 you may need to update the USB to Serial Driver
https://www.silabs.com/products/developm...cp-drivers
Baud rate is 115200
Serial Port must be enabled on the Tester
Let me know if you need anything else.

Wolf
For Info Google Drive

Great ABB shunt breaker seller River City Industrial
Great prices and superb service.
 [Image: em2566%20(1)__19172.1521541365.jpg?c=2]

Not your average Wolf       
            Cool
Reply
#14
Hi, thank you very much!
I will try it when i am home from work.
BR Ingo

Ok - i tried to download the Software. But no luck - i have to login (i don't want to login on such chinese websites).
Is there any other chance to get the software and drivers?
BR Ingo
Reply
#15
(09-30-2020, 07:33 AM)ipirk Wrote: Hi, thank you very much!
I will try it when i am home from work.
BR Ingo

Ok - i tried to download the Software. But no luck - i have to login (i don't want to login on such chinese websites).
Is there any other chance to get the software and drivers?
BR Ingo
Ha I don't blame you.  My mistake for some reason it ended up as the link to the download site. Sorry about that.
Here is the link to my google drive where the files reside. That should work.
https://drive.google.com/drive/folders/1...sp=sharing

Let me know.

Wolf
For Info Google Drive

Great ABB shunt breaker seller River City Industrial
Great prices and superb service.
 [Image: em2566%20(1)__19172.1521541365.jpg?c=2]

Not your average Wolf       
            Cool
Reply
#16
Hi,
uh nice - thanks again - it´s installed now. I only have to test it at the evening - realy nice software, you dont have to look at every measurement on the screen and check the values.
BR Ingo
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)