Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ME3000SP with Alexa, remote control
I have a ME3000SP battery charger and pylontech batteries.

I've managed to get it connected with Alexa so I can get status information - battery SOC, powers, temperatures etc. and how much energy I've generated, exported and used.

During the winter I set it to charge overnight on Economy 7, but on sunny days that means that when the sun comes up the battery is already charged.

Is anyone aware of any remote interfaces that can be used on the ME3000SP to control it and set values. It doesn't look possible over WiFi, but over RS485?
Sorry I know this is an old post. But how did you get it to work with Alexa. I’d be very interested to know how to implement that too.
UK Southwest.

7 kWp Solar Panels (28 x 250Wp Shinetime Mono).
14 X APS YC500i Micro Inverters.
42 X 40P 18650 cell packs/modules configured as 14S 120P.
Sofar Mass Energy ME3000SP AC coupled charger/inverter.
Still sourcing and processing cells for powerwall.
About halfway into my next batch of cells for another 14 40P packs
13 kWh processed and operational so far.

Forum Jump:

Users browsing this thread: 1 Guest(s)