Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
why 80p for powerwall?
#31
(02-16-2020, 01:32 AM)crashintoty Wrote:
(01-27-2020, 06:54 AM)The Kilowatt Challenge Wrote: I still cant decide whether to go 80 or 100 either. For me, I'm thinking more about the structure of the plastic holders than the capacity of the battery. 80 works really well but 100 starts to get a bit heavy and bendy.

This brings up a good question... how often does one have to pull cell packs/modules for maintenance on harvested cells?
Great question.  My oldest pack is only 2 years and no sign of needing attention yet, but of course its inevitable.   I'm hoping for at least 5-10 yrs before having to become an expert on pack recondition/repair ...  but we'll see Smile
Reply
#32
I have not switced a single One since i.started. with that sida i run very Good cells. Second hand fullt and not following proper testing perhaps once per year
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)