Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
16-Bay 18650 MegaCell Charger Overview and Testing
#1


Testing the 16-bay Cell Doctor MegaCell Charger for Lithium Ion 18650 cells. There is an active crowd-funding campaign that will help get this charger into mass production, thus increasing quality while decreasing price and delivery time.

Please visit the site below for more information and/or to place a pre-order
https://megacellcharger.com/product/mega...ntent=v1fb

Software and Firmware Downloads
http://www.megacellmonitor.com/Downloads.html
NEW Old-Stock LG 2600mAh 18650 Cells, Only $0.75/each!
^ Use discount code "BATTERY" for 10% off!
Reply
#2
Nice.though mixed Up mA and mAh Smile
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#3
(02-14-2020, 02:06 PM)daromer Wrote: Nice.though mixed Up mA and mAh Smile

Really? Ooops. I'm surprised nobody else has called me out on that yet lol.
NEW Old-Stock LG 2600mAh 18650 Cells, Only $0.75/each!
^ Use discount code "BATTERY" for 10% off!
Reply
#4
Not you Mike but om that cell doctor page Smile
mike likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#5
I have my eye on these... I feel a YouTube review coming soon! :-)
mike likes this post
Follow my Powerwall journey here: 
Youtube: https://www.youtube.com/channel/UCjXT8KJnEzo-DJHFRR1W8jg

Building the following:
20kWh Powerwall
8kW Solar
30kW Heating system
Reply
#6
Looks very well, good job. The only thing I don't like (like for most other chargers) is that you can't fit 26650s in there. Most chargers on the market can only fit about half of the 18650 slots with 26650s due to in-between space limitations.

Due to the above, I'm thinking myself at a 3D-like design, so you won't have to increase length but in the same time fill all slots with 26650.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)