Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Batrium cumulus configuration howto
#1
Does anyone know if there is a howto out there for configuring the batrium cumulus web front end? Adding devices, configurations required on the toolkit end etc...

Thingspeak is nice, but cumulus looks nicer. It would be great if it didn't need a host machine running the toolkit software too.
Current system: 9.6kWh wet Nicad batteries, 16S1P Calb LiFePo4 210aH, Batrium WM4, Outback vfx3048 inverter, mx60 mppt controller, flexware 500 mounting hardware, 2.4kW solar array, 6kW lister diesel genset. MY'13 Vauxhall Ampera
Reply
#2
Cumulus has not been released yet as far as I know - so no, there would be no documentation.
Reply
#3
There is a link to the web portal on their new website, you can create an account and add devices...

I've registered an account, I'll see if I can add my device.
Current system: 9.6kWh wet Nicad batteries, 16S1P Calb LiFePo4 210aH, Batrium WM4, Outback vfx3048 inverter, mx60 mppt controller, flexware 500 mounting hardware, 2.4kW solar array, 6kW lister diesel genset. MY'13 Vauxhall Ampera
Reply
#4
I registered and added my device. It looks like they still have sample data in there from the web template. Maybe it wasn't supposed to be public yet? I'm not sure...

Edit: I just checked with Batrium and they said the pages were not supposed to be public yet.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)