Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend me a BMS for LiFePO4
#11
I know that, isnt it obvious....
The BMS does limit charging, discharging LEVEL.
Everyone here seems to preach that a BMS is absolutely needed or all hell will break loose.
Thats why im asking wich BMS would be best.

I can already charge and discharge with what i have to any level
Reply
#12
You wrote "Controll charging". If you need the BMS to talk to the chargecontroller. (Its doable) you need like Batrium or something and a charger that talk a common language doing it.

A BMS is not needed because else all hell will break loose. A BMS is needed WHEN hell breaks loose. Smile
Gato likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply
#13
(03-01-2020, 05:24 PM)daromer Wrote: A BMS is not needed because else all hell will break loose. A BMS is needed WHEN hell breaks loose. Smile

Hopefully a BMS can trigger protective action BEFORE any hell breaks loose (when looks like it might be going bad soon... :-)
Running off solar, DIY & electronics fan :-)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)