Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Busbar for 150a continuous 300a peak
#2
We cant tell because we dont know what size it is. 20cells with 300a is huuuge.. thats 15a per cell. Beware that higher current just slightest resistance in the busbar Will cause the cells closest to the connection to have higher load. Up to 30a Id wrongly done.


What is the size of that bar? Do you going to run The oposite om the other Side? And what Wire do you Connect the cells with? (You cannot have cell level fuses on that high current. It wont work)
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply


Messages In This Thread
Busbar for 150a continuous 300a peak - by Rw3000 - 05-10-2020, 10:00 AM
RE: Busbar for 150a continuous 300a peak - by daromer - 05-10-2020, 10:11 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)