Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Busbar for 150a continuous 300a peak
Yes you need thick wire between busbar and the cells. I wouldnt consider them fuses since those will be so thick that that are way above what the cell can handle for it to be a proper fuse.

Just make sure you have decent pack-fuse instead.
NOTE! My links supplied in this message may be affiliated with Ebay and by clicking on them you agree on the terms.
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh

Messages In This Thread
Busbar for 150a continuous 300a peak - by Rw3000 - 05-10-2020, 10:00 AM
RE: Busbar for 150a continuous 300a peak - by daromer - 05-11-2020, 09:55 AM

Forum Jump:

Users browsing this thread: 1 Guest(s)