ShortcutShawn
New member
- Joined
- Dec 18, 2019
- Messages
- 4
I am in the final stages of building my first Power Wall, its a 14s 50p. I have assembled the packs and have been capacity testing them with the icharger X6, and have picked up variances from 91Ah to 102Ah between the packs.
They have been assembled using re-packer, and according to the Litokala's they are all rated at about107540mAh (107Ah)
I understand that the Lii-500's can be off by as much as 10%, but a pack as low as 91Ah and another as high as 102Ah is quite a variance?
Is it a potential issue?
Should i be adding cells to them to balance them out ?
Should i be stripping them down and re-testing ?
Thanks any feedback is greatly appreciated.
They have been assembled using re-packer, and according to the Litokala's they are all rated at about107540mAh (107Ah)
I understand that the Lii-500's can be off by as much as 10%, but a pack as low as 91Ah and another as high as 102Ah is quite a variance?
Is it a potential issue?
Should i be adding cells to them to balance them out ?
Should i be stripping them down and re-testing ?
Thanks any feedback is greatly appreciated.