Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Growatt 1500s
#1
Just picked up Growatt 1500s inverter and in the installation manual it mention DIP stick config for different countries.

I can't seem to find UK on the list. UK grid network recommendations include G83 and G59.

Anyone have similar configuration with other inverter?
Reply
#2
Video 
hermitdave likes this post
Reply
#3
Thank you @Sean
I’ll try G59 first?
Reply
#4
hermitdave Wrote:Thank you @Sean
I’ll try G59 first?

Hi bud

It relates to your PV size and connection type, most residential is under 4kWp and can be connected under G83. If over 4kWp then it would have been connected under G59 and required a DNO application approval, they would have come out and inspected the local grid power lines to confirm that it can handle your potential export.

That was what I had to do due to having a 7kWp system.
hermitdave likes this post
UK Southwest.

7 kWp Solar Panels (28 x 250Wp Shinetime Mono).
14 X APS YC500i Micro Inverters.
42 X 40P 18650 cell packs/modules configured as 14S 120P.
Sofar Mass Energy ME3000SP AC coupled charger/inverter.
Still sourcing and processing cells for powerwall.
About halfway into my next batch of cells for another 14 40P packs
13 kWh processed and operational so far.
Reply
#5
(06-08-2020, 01:29 AM)chuckp Wrote:
hermitdave Wrote:Thank you @Sean
I’ll try G59 first?

Hi bud

It relates to your PV size and connection type, most residential is under 4kWp and can be connected under G83. If over 4kWp then it would have been connected under G59 and required a DNO application approval, they would have come out and inspected the local grid power lines to confirm that it can handle your potential export.

That was what I had to do due to having a 7kWp system.
Many thanks
Reply
#6
I was told that it should already be set but I will double check before installation.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)