slimf
Member
- Joined
- Sep 26, 2017
- Messages
- 226
Hi Everyone.
I'm in need of ideas to mount Nissan Leaf modules.
My original plan was to use a rack case - See photo of work to date. My original plan was 14S (7 Modules in series) and6P. The new powerwall will be 14P. (I got more modules)
However, after obtaining some new modules it will be tobig for a single rack cabinet. I would also like to think in the future I can obtain more modules, so the idea of stacking in a rack cabinet as I originally did (see picture)doesn't appeal to me as its a massive PITA to disassemble and reassemble to add new modules. Not to mention the mess of bus bars.
Therefore I would like to mount them 7 modules wide and 14 high.. Doing this will allow me to easily add 7 modules at a time to the top of the stack if / whenever new modules become available.
7 modules wide on factory mounts is 1680mm wide, 40mm deep and @ 14 P around 500mm high. It will weight a shit ton, so Bunnings shelving seems out of the question, especially if it grows in the future.
Has anyone got any ideas / pictures etc?
I'm in need of ideas to mount Nissan Leaf modules.
My original plan was to use a rack case - See photo of work to date. My original plan was 14S (7 Modules in series) and6P. The new powerwall will be 14P. (I got more modules)
However, after obtaining some new modules it will be tobig for a single rack cabinet. I would also like to think in the future I can obtain more modules, so the idea of stacking in a rack cabinet as I originally did (see picture)doesn't appeal to me as its a massive PITA to disassemble and reassemble to add new modules. Not to mention the mess of bus bars.
Therefore I would like to mount them 7 modules wide and 14 high.. Doing this will allow me to easily add 7 modules at a time to the top of the stack if / whenever new modules become available.
7 modules wide on factory mounts is 1680mm wide, 40mm deep and @ 14 P around 500mm high. It will weight a shit ton, so Bunnings shelving seems out of the question, especially if it grows in the future.
Has anyone got any ideas / pictures etc?