Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Battery capacity ?
(09-03-2020, 08:47 PM)daromer Wrote: Diggsut when doing 4 cells its only 0.5A during discharge. The lack of function i talk about is the stresstest. The Lii have lower current during a cycle test and therefore i call it lack of function Smile

You can ignore the IR test on those testers. They can vary 100% or more easily and are pretty of from the start. Get a 4-wire tester instead. Smile

Hmmm..... Default is .5A but you can choose 1 amp through the menu for discharge and cycling.

Agreed - A four wire tester should be used for IR. I never put much faith in the absolute IR value other than relative to other cells being tested.
1a then its max 2 cells. As soon as you put in 4 cells the discharge goes down to 0.5. its also mentioned in the specifications.
NOTE! My links supplied in this message may be affiliated with Ebay and by clicking on them you agree on the terms.
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh

Forum Jump:

Users browsing this thread: 1 Guest(s)