Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3048LV-MK does not turn on with no battery
#1
Hi everyone

Quick question - does anyone know if the 3048LV-MK needs to have a battery to turn on? I connected the Input and Output AC only (with no battery) and tried to turn it on and nothing happened.

Just want to be sure I didn't wire something wrong! A volt meter showed that power really was at the input side of the inverter.

Reading the manual, I didn't see anywhere that says it needs a battery, but then again it did say something like "connect a battery then turn it on"
Reply
#2
Maybe it needs a DC input to turn on? Solar or battery

Later
floyd
Reply
#3
It need battery. They only have 1 batteryless offgrid inverter that can run without battery.

Note that offgrid inverters are using battery as main source. Thats their function. Also note that its BAAAAD practice to turn any solar gear on without having the battery connected first-hand.

It can basically kill the gear Wink
NOTE! My links supplied in this message may be affiliated with Ebay and by clicking on them you agree on the terms.
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 100kWh LiFePo4 | 20kWh 14s 18650 |  66*260W Poly | ABB S3 and S5 Trip breakers
Upcoming: 14S 18650~30kWh
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)