Crimp Daddy
Member
- Joined
- Feb 21, 2018
- Messages
- 973
Since making this video, I have made a parallel cable to utilize both channels at the same time, upgraded the connectors to XT90, and this isallowing for a max of 70 amps of charge/discharge capability.
I will post another video, but at 60 amps, I was able to complete a discharge from full in about 1 hour.
I would be happy to answer any questions and or make another video about a topic specific to this charger if anyone has any requests.
Updated 9/28 - Part 2 Video - Built a new cable to replace the Andersons and discussed charger setup.
iCharger 4010 Synchronous Mode Setup & DIY High Current Cable Build
I will post another video, but at 60 amps, I was able to complete a discharge from full in about 1 hour.
I would be happy to answer any questions and or make another video about a topic specific to this charger if anyone has any requests.
Updated 9/28 - Part 2 Video - Built a new cable to replace the Andersons and discussed charger setup.
iCharger 4010 Synchronous Mode Setup & DIY High Current Cable Build