Testmon problem

I have finally finished my wiring loom and connected my 14S to my testmon. Trouble is, I get inconsistent test results. My setup passes and then fails - seemingly at random, but always with the same error - no jumper.

I have checked my jumper and it seems fine. Ive restripped and put new ferrules on 3 times to no avail. Sometimes it passes and sometimes it fails.

Has anyone else experienced issues with testmon? Im 85% confident its not my wiring.

What voltages are the cells at?
Maybe post some pictures?

Cells at 3.79v
I have a video I recorded for Batrium.. Ill post after I get a response from their support.




Voltages on the screws of the testmon terminal blocks all check out.

I'm sure that U.03 had issues with intermittent fail status when testing. I ran into the problem with my first watchmon. U.05 changed a little (timing) to help fix the problem.

https://support.batrium.com/article/258-troubleshooting-testmon

Hi

Hmm thanks - this looks to be my issue. Hopefully they will
Confirm tomorrow via email.

I do have my cells at storage voltage, so would be considered low I suppose.