Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2x 7S28P = 7S56P without series cell connection
#1
Hey Guys,

I've got 2 pack of 7S28P of LG MG1 and I need to make 7S56P, but... due to the fact they are in own casing I do not want open them up and Connect 28p with each other. (two 7S separate balancers)

So they will only by connected by plus and minus terminals creating 7S56P with separate 28cell. 
I hope it's clear enough  Angel

How bad idea is it?
Spot Welder - Mactronic V3.3
Battery - ~7S1P 60Ah SAMSUNG SDI prismatic cell - I'm looking for more info about them  Huh
BMS - bluetooth 1A active balancing
Inverter - 3kW AIMS  pure sine
Solar - considering addding 220W with MPPT Make Sky Blue 30A
Set up for mobile gastronomy 2kW cooling compressor + 500W appliancies

Reply
#2
Its fine as long as you have 1 bms per pack. Controlling each pack that is and taking care of it.
Korishan likes this post
The Ultimate DIY Solar and build place
YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcoming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply
#3
+1 daramer
Nothing wrong with connecting them at the absolute ends. Just make sure to have a fuse between each bank to the busbar, so you'd have 2 fuses in this current setup. If you add anymore, you'd have another fuse for each one.
Ideally, just a suggestion, if you could put a shunt on each bank/string so that you can tell if 1 string is pulling/draining faster than the other. If each one has it's own bms, you might be able to use it for this information instead.
Proceed with caution. Knowledge is Power! Literally! Cool 
Knowledge is Power; Absolute Knowledge is Absolutely Shocking!
Certified 18650 Cell Reclamation Technician

Please come join in general chit-chat and randomness at Discord Chat (channels: general, 3d-printing, linux&coding, 18650, humor, ...)
(this chat is not directly affiliated with SecondLifeStorage; VALID email req'd)
Reply


Who read this thread?
23 User(s) read this thread:
daromer, Sean, Korishan, PAF, Geek, sturgeo, spinningmagnets, Issac, gpn, Headrc, Riplash, 100fuegos, Wolf, stevelectric, ajw22, DomingoRP, OffGridInTheCity, Rubert, 100kwh-hunter, Saiya, krobertson, stok, kpeters000

Forum Jump:


Users browsing this thread: 1 Guest(s)