Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Are there any tobacco growers here?
#1
Well hello fellow growers, if there are any.
With tobacco, i mean tobacco and NOT weed, or any other thc growing plant.
Without chemicals, just pure clean tobacco.

Anyway:
I want to have my curing and drying room for tobacco back, for the 18650.
In order to do that i am going to build myself a curing chamber/oven.

Now i have been doing this for years, this way:
Hanf the fresh tobacco outside, till it gets flat and weak.(Yellowish)
Hang the leaves inside in a chamber with 35Celcius, and a rh of 85% to ferment
When all is yellow or brown(depends on the kind) the rh is going down to 75 to let it cure.

I am not going to use a crockpot or a old fridge or something that will keep me busy..
But more a custom made oven with proper wooden sheets and insulation!

I ordered from ali a heating pad 300w 230v and a temperature/humidity controller.
I can go all the way with all the combinations, even freezing if it must be done.

But, if i look at yt at the commercial tobacco growers, they start at day 1 at 35c day two at 45c day 3 at 55c.
Everything is bone dry, but in the good color, then they are going to humidify it back into case i guess ~70%.

Does anyone have some experience with this method?, You lost flavor?
Other ins and outs?
Any thoughts?????

Thanks in advance and with best regards.
Still learning English. Learning Li ion and solar technology.

2800 cells in packs Exclamation above 2500mah and 90%soh.
~400 cells between 1800-2500 and above 90%soh(sell?)
600 cells between 2200 - 3000mah, 80-90%soh (sell?)
3000 waiting for testing.
approx: 0 cells not safe for use: dead, heaters, to high ir or sd/vamps

Time is our enemy, must work to, the sun is our friend, must relax to.
With best regards
Reply


Who read this thread?
8 User(s) read this thread:
Korishan (08-03-2019, 06:10 PM), wim (08-03-2019, 02:51 PM), Geek (08-05-2019, 12:54 AM), bogptrsn (08-04-2019, 01:37 PM), Riplash (08-03-2019, 07:41 PM), 100kwh-hunter (08-03-2019, 02:23 PM), Zonax (08-04-2019, 08:07 PM), drnickriviera (08-18-2019, 08:28 PM)

Forum Jump:


Users browsing this thread: 1 Guest(s)