Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Canuck RV Battery
#11
So I totally had to print a test set just to see if my measurments were close enough.  So I got a chance last night when the machine was done for the day to put in a run of a couple.  

They fit perfectly.   I could not be happier.   Now to make more...   lol  Mwahahahahahahaha

 
Korishan and hbpowerwall like this post
Reply
#12
Ok I got some Pack holders printed and a board started to organize my Power wall.   I want to get another Bank done above the current one to get more mAh.   I'm currently running a Capacity test on the bank to see how balanced it is and so far so good.

I am waiting for my Cell Balancer and DC - DC converter which will go on the wall too.

Korishan, hbpowerwall, Andreas Kvernes And 1 others like this post
Reply
#13
looks good. I plan on 3d printing a mounts as well. have links to your stl files?
Reply
#14
It came from thingaverse but you need openSCAD to make your packs. I have it installed here if you want I can customize it for your application then send you the stl
Reply
#15
I found the original sketchup files and the stl so here they are for all to have.  These are my creations and I'd like everyone to benifit.  Cheers

P.S. I cannot upload .zip files here so I will host it on my google drive ----> Here https://drive.google.com/drive/folders/0...sp=sharing

in that folder is the sketchup files for both top and bottom holder that I created and the cell holder files I got from thingiverse
Reply
#16
Unfortunately, we have to block the zip files for security reasons. Thanks for going to the effort of uploading to Google Drive
jdeadman likes this post
If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
#17
I also tried to upload a single .stl is it gave me a file format error as well.
Reply
#18
i'll check with Mike to see if that's a good idea for the forum. Pete
If you'd like to support the forum please feel free to use my affiliate links to purchase all kinds of stuff for your projects 
Amazon - https://amzn.to/2qURmH2
eBay - https://goo.gl/6mrQHH 
Aliexpress - http://s.click.aliexpress.com/e/bNLW537E
Banggood -  https://goo.gl/FF2v6W
Battery Hookup - http://bit.ly/2Oe9PLW 
Reply
#19
Thanks Pete
Reply
#20
The stl filetype has been added. Please try uploading and let us know if it works.
Reply


Who read this thread?
100 User(s) read this thread:
hbpowerwall (11-12-2018, 09:49 AM), AZ_Tekkie (01-22-2018, 06:37 AM), Chickey (05-24-2017, 01:59 PM), daromer (01-19-2018, 06:54 PM), Minatugar (04-30-2017, 09:06 PM), mike (06-15-2017, 07:49 PM), 18650Shrink (10-16-2018, 02:57 AM), goodnowm (10-19-2017, 03:15 AM), BigBen (01-04-2018, 12:28 PM), station240 (05-05-2017, 05:36 AM), Joaquinsfy (05-18-2017, 01:33 PM), NiVa (01-04-2018, 10:29 PM), Lux_Gamer (06-07-2017, 10:08 AM), Andreas Kvernes (06-21-2017, 06:04 PM), owitte (11-02-2017, 11:05 PM), opus40 (05-06-2017, 05:55 AM), ken (05-13-2017, 08:45 AM), VdVoort4 (05-31-2017, 07:39 AM), Glubux (06-21-2017, 07:43 PM), Majorphill (06-21-2017, 11:30 PM), coolfx (06-22-2017, 06:20 AM), Herebus (08-16-2017, 02:20 AM), ruby2 (06-01-2017, 10:33 AM), JustJim (11-30-2017, 06:28 PM), Korishan (10-03-2018, 03:29 AM), P.Tasyo Powerwall (10-07-2018, 01:10 PM), PAF (10-03-2018, 10:52 AM), FERCSA (04-29-2017, 11:28 AM), Franky Beuselinck (10-03-2018, 12:15 PM), Batrium (06-15-2017, 10:39 PM), Darmok (06-02-2017, 04:01 PM), Wattsup (01-04-2018, 07:07 AM), Scepterr (06-02-2017, 08:21 PM), Batteriapan (01-21-2018, 03:00 PM), BobinTN (05-27-2017, 02:46 AM), egam (06-08-2017, 10:44 PM), Alec_J (05-25-2017, 07:30 AM), Droid126 (06-16-2017, 10:32 PM), chriskool59 (05-06-2017, 08:46 PM), eAnic (05-17-2017, 01:40 PM), jdeadman (11-12-2018, 02:02 PM), charlie246 (05-25-2017, 04:01 AM), crud (04-28-2017, 06:32 PM), Zagy (05-02-2017, 05:57 AM), 2146 (01-25-2018, 05:12 PM), wim (10-03-2018, 05:05 PM), wimpie007 (01-28-2018, 03:23 PM), MajStealth (05-05-2017, 05:54 PM), ericg (05-02-2017, 09:07 PM), Joe Farrugia (11-16-2017, 12:18 PM), frnandu (05-22-2018, 02:16 PM), melsom (05-07-2017, 12:24 AM), typ49 (06-03-2017, 07:47 PM), VicRC (05-12-2017, 03:24 PM), AussieJake (05-04-2017, 07:00 PM), KD0CAC (05-07-2017, 11:28 PM), HandyAndy (08-20-2017, 05:55 PM), Redmohawk (05-07-2017, 11:54 AM), Tommy Ng (08-23-2017, 01:40 AM), John (06-03-2017, 04:45 AM), Christian (05-06-2017, 02:29 PM), Radi (05-24-2017, 03:44 PM), Jeremy Choy (06-15-2017, 05:33 PM), 1958 greyhound (08-19-2017, 09:41 PM), LancerSolurus (05-14-2017, 11:22 PM), Sentinal (06-02-2017, 06:18 AM), Paul Baker (06-17-2017, 02:39 AM), kktuo (06-02-2017, 10:41 PM), civitou (06-21-2017, 05:24 PM), neilmc (06-17-2017, 05:56 AM), Tobbe O Kompani (05-26-2017, 05:25 AM), Ragulin83 (09-23-2017, 01:51 PM), rebelrider.mike (01-29-2018, 10:44 PM), kaits31 (05-26-2017, 09:57 PM), watts-on (10-03-2018, 11:58 AM), Dan Lim (08-16-2017, 12:00 AM), jesusangel (08-15-2017, 08:33 PM), arierep60 (05-30-2017, 01:06 PM), Gimpy_AK (12-22-2017, 05:45 PM), Steven Edelman (06-01-2017, 03:16 AM), Daggerzz (06-05-2017, 03:13 AM), Hanssing (08-20-2017, 06:29 AM), Fredd (11-29-2018, 08:53 AM), autobd (06-30-2017, 11:15 PM), IronSky (01-19-2018, 07:29 PM), Mark Daniel Olsen (01-04-2018, 07:40 PM), DrkHrs13 (06-19-2017, 09:51 PM), silverse2m6 (06-16-2017, 12:39 PM), Taz D'vil (07-08-2017, 01:30 AM), clarorayen (06-22-2017, 04:03 AM), kot (03-13-2018, 07:14 PM), Arie Bal (06-19-2017, 12:25 PM), Stefaan De Ridder (01-19-2018, 07:17 PM), Igor Maliszewski (07-18-2017, 07:48 AM), Chiptosser (07-03-2017, 04:58 PM), Inverted 18650 (08-18-2017, 11:37 AM), BlueSwordM (08-15-2017, 09:38 PM), Piotr Dziel (07-08-2017, 08:16 PM), Johnny Stauersbøl (08-19-2017, 08:33 PM), Dennis Van Hoek (08-19-2017, 08:20 PM)

Forum Jump:


Users browsing this thread: 1 Guest(s)