Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cartridge Style Power Wall
#31
(01-29-2019, 11:55 AM)emuland-metroman Wrote: do you solder fuses to small pin? isn't that very hard? i'm trying spotwelding (with pain on settings)

Yes I soldered the fuses to the small pin on the holders then bent the pins straight up to make more room for the fuse legs. Then soldered to the fuses copper pipes. Soldering to the pipes is way more difficult to get enough heat transferred to them.
Cartridge Wall


Reply


Who read this thread?
100 User(s) read this thread:
hbpowerwall (01-30-2019, 01:15 AM), daromer (01-29-2019, 03:07 PM), Sean (01-18-2019, 01:26 AM), mike (12-26-2018, 07:05 PM), NiVa (12-13-2018, 04:41 PM), askmike72 (01-11-2019, 10:39 AM), Majorphill (12-20-2018, 11:56 PM), Korishan (01-29-2019, 11:16 PM), A + A (01-18-2019, 03:44 PM), P.Tasyo Powerwall (12-15-2018, 05:58 AM), PAF (01-29-2019, 04:02 PM), FERCSA (12-13-2018, 01:12 PM), Franky Beuselinck (01-18-2019, 06:08 PM), jdeadman (01-18-2019, 01:54 PM), 2146 (12-27-2018, 04:16 PM), wim (01-29-2019, 03:59 PM), wimpie007 (02-05-2019, 10:38 PM), Pabickwermert (02-13-2019, 04:17 AM), The-J-Man (02-03-2019, 11:26 PM), 1958 greyhound (01-04-2019, 11:26 AM), watts-on (01-29-2019, 03:46 PM), jesusangel (12-28-2018, 05:23 PM), Hanssing (01-19-2019, 10:23 AM), Fredd (01-30-2019, 02:43 PM), IronSky (01-29-2019, 10:38 PM), Stefaan De Ridder (01-30-2019, 09:55 AM), AzJames (01-24-2019, 07:27 PM), Chiptosser (01-29-2019, 02:52 PM), BlueSwordM (01-11-2019, 03:46 PM), tremors (12-12-2018, 10:26 PM), Johnny Stauersbøl (12-29-2018, 09:37 PM), Shade (12-13-2018, 12:17 AM), Daveyboy (01-01-2019, 01:16 PM), Mazlem (12-12-2018, 10:15 PM), Geek (02-11-2019, 04:52 AM), Jon (01-01-2019, 09:27 PM), mr_hypno (01-29-2019, 02:11 PM), floydR (12-26-2018, 04:22 AM), AlexCPU (02-07-2019, 10:44 AM), mickduc (01-12-2019, 02:07 PM), frenchclem17 (01-15-2019, 04:39 PM), TimFr (12-17-2018, 01:26 PM), Lucian Macota (01-29-2019, 06:52 PM), DCkiwi (01-31-2019, 05:49 AM), emerca (12-14-2018, 08:56 AM), rev0 (12-12-2018, 10:29 PM), not2bme (01-18-2019, 01:05 AM), bogptrsn (01-29-2019, 12:34 PM), Jensk (02-02-2019, 06:27 PM), Filip (12-16-2018, 01:50 PM), karmi27 (01-29-2019, 10:41 PM), Solexx X (01-18-2019, 01:52 AM), Ste Collister (02-06-2019, 08:46 PM), Charly144 (01-20-2019, 01:44 PM), djuro (02-02-2019, 02:17 PM), BoomBoomShroom (12-13-2018, 07:13 PM), SecondHandPower (12-29-2018, 06:55 PM), ClardiPower (02-04-2019, 02:33 PM), sturgeo (01-02-2019, 09:38 AM), spinningmagnets (12-14-2018, 12:16 AM), jm1 (01-18-2019, 01:22 AM), cosmic (12-18-2018, 09:58 PM), Jason Morris (12-12-2018, 08:04 PM), marcin (01-29-2019, 01:14 PM), drchips (01-20-2019, 01:17 PM), kosmo (02-14-2019, 05:03 AM), cat23 (12-26-2018, 05:19 PM), Oran Maliphant (01-05-2019, 07:28 PM), rtgunner (12-27-2018, 02:08 AM), Drokz (02-07-2019, 02:58 PM), simonisabella (12-24-2018, 06:31 AM), gpn (12-14-2018, 05:18 PM), Chablis_m (01-18-2019, 04:00 AM), Headrc (01-18-2019, 03:21 PM), Eratigena (01-30-2019, 10:43 AM), ARLISS (02-15-2019, 06:35 PM), Crimp Daddy (12-26-2018, 11:21 PM), Redpacket (01-30-2019, 08:37 AM), velside (01-10-2019, 12:16 AM), Ibiza (02-11-2019, 01:40 PM), Krokodino (12-19-2018, 03:53 PM), Onizuka (01-29-2019, 04:05 PM), Zvonko000 (01-02-2019, 01:46 PM), davidtrn24 (01-30-2019, 02:18 AM), choncy12 (01-19-2019, 01:33 AM), Bubba (12-14-2018, 10:25 PM), Willowvale (01-23-2019, 10:03 AM), Cherry67 (12-16-2018, 10:05 AM), Sholphin02 (02-04-2019, 03:43 AM), Tom Bergisch (12-30-2018, 09:33 AM), Walde (01-06-2019, 01:10 PM), Riplash (01-20-2019, 02:44 PM), 100fuegos (01-20-2019, 09:10 PM), Jim Jr. (12-16-2018, 11:32 PM), Flashoverwrite (12-14-2018, 09:00 PM), bukvaahmed@gmail.com (01-29-2019, 05:09 PM), w0067814 (01-21-2019, 05:00 PM), nkako (12-17-2018, 02:06 PM), Buzz0515 (01-24-2019, 04:19 PM), pipap (01-11-2019, 11:02 AM)

Forum Jump:


Users browsing this thread: 2 Guest(s)