Beginners Guide to Processing 18650 Cells | Cell Database



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electric Kid four wheeler battery
#21
So the packs have came in . Have them took apart . How are you guys taking them apart without sparking up the world. I would hate to know i had 1000 plus to process.The board being in the middle is very agrivating . Mine wasnt on the side. Orderd a solderless kit . I have to say great concept but i wont be getting any more . I probably pressed them in a bit to much a lot of them broke. The ones with the heat shrink seemed to be to big.

Do have to say the packs seem to be nice . They look a bit different though mine came with the cells completely heat shrink wrapped . Bought 5 more .and plan to use some of them for a ebike . 36volt . Plug and play. Seems a lot easier with less time consuming too for that .
Reply


#22
flush cut snippers and go snip snip. leave the tabs on the cells and just solder to the tabs.
Proceed with caution. Knowledge is Power! Literally! Cool 
Knowledge is Power; Absolute Knowledge is Absolutely Shocking!
Dollar Shave Club. Best Razor I've ever used
Certified 18650 Cell Reclamation Technician
Reply
#23
Will remember that next time i get more cells . I used regular wire cutters like i do for coax at peoples houses . Good idea though. I pulled mine completely off. Still had traces of that mess.
Reply
#24
great thread!
I will keep watching this one because this week I will make a battery for my nephew too and I will create a thread to show it Smile
Reply
#25
(09-26-2017, 09:04 AM)arierep60 Wrote: great thread!
I will keep watching this one because this week I will make a battery for my nephew too and I will create a thread to show it Smile


Cool
Is that supposed to be a hint you want some pictures of my horrid able work heres a couple of them for now  Dodgy

arierep60 likes this post
Reply
#26
Those mounts look nice!
I will use the cheap black ones from ebay and I think they will work fine Big Grin
btw you have idea off the autonomy you will get with the new LiIon battery?
Reply
#27
I will be 3d printing my next ones. These i got to easy change out . But Looks like to change 1 cell . I would have to still take apart the entire thing nearly. I do like the fact they are red and blue though . No idea of how much longer i will get with that one . Hopefully near double . Being the stock battery is 12v 12 ah. And 1 pack is 36v 4.4 i have almost pack and half i believe .
Reply
#28
(09-28-2017, 02:12 AM)nokiasixteth Wrote: I will be 3d printing my next ones. These i got to easy change out . But Looks like to change 1 cell . I would have to still take apart the entire thing nearly. I do like the fact they are red and blue though . No idea of how much longer i will get with that one . Hopefully near double . Being the stock battery is 12v 12 ah. And 1 pack is 36v 4.4 i have almost pack and half i believe .

I'm waiting for news Smile 
btw I will create my thread today Wink
Reply


Who read this thread?
82 User(s) read this thread:
Greg (08-30-2017, 06:42 AM), floydR (10-01-2017, 04:18 PM), SimonW (09-26-2017, 03:20 AM), NZ55 (09-06-2017, 04:57 AM), Geek (10-04-2017, 12:54 AM), mike98 (08-28-2017, 11:18 PM), Dave Tucker II (10-01-2017, 11:18 PM), jrandomb (08-29-2017, 01:36 AM), SWEwall (08-28-2017, 08:14 AM), WildCard_25 (09-30-2017, 10:28 AM), Ivo Staelens (09-26-2017, 10:12 AM), Mrsmith (09-07-2017, 10:51 AM), fabioelsabio (09-26-2017, 09:26 AM), DarkRaven (09-27-2017, 03:55 PM), Gerard Achternaam (09-28-2017, 05:23 AM), mormor1971 (10-03-2017, 12:33 PM), ahillqck (09-27-2017, 03:12 PM), teslar (09-28-2017, 12:13 PM), slimf (09-30-2017, 11:13 AM), cspenger (09-27-2017, 04:26 PM), accoelho (10-03-2017, 12:42 PM), shotter_69 (10-08-2017, 02:13 PM), Emorales (10-12-2017, 04:44 PM), heynow999 (12-06-2017, 07:38 PM), davidpesce (09-16-2017, 11:35 AM), frenchclem17 (09-15-2017, 07:03 AM), Chris Jardine (09-30-2017, 05:07 AM), Joey T-Bone Smith (01-12-2018, 10:04 PM), osweld (09-30-2017, 02:31 AM), Stuart Pittaway (10-02-2017, 11:50 AM), zag2me (09-26-2017, 10:25 AM), dougal (10-03-2017, 01:07 PM), Betillo Gálvez (12-28-2017, 02:59 PM), nokiasixteth (09-28-2017, 02:12 AM), hbpowerwall (08-31-2017, 03:14 AM), Wattsup (10-01-2017, 08:57 PM), eeesOap (09-28-2017, 04:27 PM), Tristan Timmer (08-28-2017, 01:47 AM), egam (08-28-2017, 01:26 AM), Alec_J (08-29-2017, 12:54 AM), flight4900 (09-01-2017, 11:27 AM), jdeadman (10-03-2017, 01:45 PM), crud (08-31-2017, 11:11 AM), wim (11-14-2017, 07:05 PM), wimpie007 (09-26-2017, 06:42 PM), Darmok (09-24-2017, 12:48 AM), FireFrog (08-29-2017, 09:40 PM), Chickey (09-13-2017, 10:03 AM), daromer (09-28-2017, 06:57 AM), mike (09-26-2017, 12:03 PM), Toochi84 (10-23-2017, 03:50 PM), goodnowm (10-28-2017, 06:42 PM), owitte (09-28-2017, 02:15 PM), VdVoort4 (08-30-2017, 12:29 PM), coolfx (08-30-2017, 01:05 PM), Korishan (10-03-2017, 05:22 PM), PAF (10-03-2017, 02:12 PM), frnandu (10-05-2017, 09:56 AM), The-J-Man (08-28-2017, 06:22 PM), Jeremy Choy (08-28-2017, 11:12 PM), Chiptosser (08-30-2017, 01:08 PM), Dennis Van Hoek (09-06-2017, 03:18 PM), N00bPwr (09-26-2017, 09:25 AM), KaminoReal (10-02-2017, 08:17 PM), Robert Crawley (08-30-2017, 12:46 PM), netmonk (10-03-2017, 02:08 PM), paraskevas (09-06-2017, 04:10 PM), vossman77 (08-28-2017, 10:35 PM), ivnz (09-28-2017, 04:53 AM), Stefaan De Ridder (10-03-2017, 01:47 PM), silverse2m6 (08-28-2017, 09:47 AM), Abarth595 (08-29-2017, 10:20 AM), tbostjan (08-30-2017, 01:01 PM), watts-on (10-03-2017, 12:14 PM), Dan Lim (08-30-2017, 02:29 AM), jesusangel (10-14-2017, 08:09 AM), arierep60 (10-03-2017, 11:33 AM), Hanssing (08-30-2017, 04:17 PM), MetalFang (09-19-2017, 08:44 AM), autobd (08-29-2017, 12:57 PM), IronSky (08-27-2017, 11:47 PM), Chris Davis (09-15-2017, 03:41 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)